4049759056247

This fiber optic patch cable is designed for creating a short connection between a passive fiber optic interface and an active network port within a structured cabling environment according to ISO IEC 11801. The cable is configured as a duplex connection with 2× LC-duplex APC connectors and is suitable for singlemode OS2 G652D applications. The connection is an LC/APC-LC/APC fiber optic connection with an 8° APC polish angle, intended for applications where low reflection and stable signal quality are required. The LSZH jacket makes the cable suitable for installations where low smoke emission and halogen-free material are required. Specifications • Cable type fiber optic patch cable • Design duplex for simultaneous transmission and reception • Fiber type singlemode 9/125 µm • Category OS2 G652D • Number of fibers 2 • Connector side 1 2× LC-duplex APC 8° • Connector side 2 2× LC-duplex APC 8° • Connector standard IEC 61754-20 • Connector finish APC • Connector material ceramic ferrule • Cable type I-V(ZN)H • Cable diameter 2.0 mm • Jacket material LSZH • Jacket construction zip-twin • Jacket color yellow • Strain relief aramid yarn with crimped bend protection • Maximum tensile strength 160 N • Bend radius dynamic 20× OD • Bend radius static 10× OD • Operating temperature −20 to 70 °C • Storage temperature −20 to 85 °C • Quality class singlemode B/2 • EMI immunity complete insensitivity to electrical and electromagnetic interference • Insertion loss 1310 nm less than 0.3 dB • Conformity ISO IEC 11801 • Fire classification EN 50265-2-1 and EN 50267-2-3 • Test 100% tested with individual measurement report IEC standards • IEC 60793-2 specification of fiber core and fiber structure • IEC 60793-2-50 definition of singlemode fiber type G652D • IEC 61754-20 definition of LC connector interface • IEC 61753-1 performance class B/2 for singlemode connectors • IEC 60754-1 halogen-free properties • IEC 61034-1 low smoke emission EN standards • EN 50265-2-1 flame retardant behavior of cable jackets • EN 50267-2-3 halogen-free jacket materials Explanation of terms • 2× LC-duplex APC two LC connectors per side with 8° angled polish for low reflection • APC angled physical contact with angled end-face polish to reduce back reflection • Duplex two separate optical fibers where one fiber transmits and the other receives • Singlemode 9/125 µm fiber type with very small core for long-distance transmission • OS2 G652D singlemode fiber with low attenuation, suitable for transmission at 1310 nm and 1550 nm in backbone and long-distance connections • LSZH jacket material with low smoke emission and without halogen-containing substances • Ceramic ferrule precision holder that precisely centers the optical fiber for stable signal transmission • EMI immunity signal transmission via light without being affected by electric currents and magnetic fields • Bend radius minimum cable curvature to prevent microbends and additional attenuation • Bend radius static minimum bend after the cable is installed and fixed • Bend radius dynamic minimum bend during installation or movement of the cable • B/2 quality class quality class for singlemode connectors with strict tolerances • I-V(ZN)H cable type European designation for halogen-free fiber optic cable for indoor installations General explanation of fiber optic cables • LC compact fiber optic connector with snap-in latch for high port density • SC rectangular fiber optic connector with push-pull latch for patch panels • ST round fiber optic connector with bayonet latch for older installations • FC fiber optic connector with screw coupling for measurement and industrial applications • E2000 fiber optic connector with protective cap for low reflection and extra safety • MPO / MTP multiple fiber optic connector for high fiber density in data centers • Simplex single fiber for data transmission in one direction • Duplex two fibers for simultaneous communication in both directions • Multimode fiber fiber type for short to medium distances within buildings • Singlemode fiber fiber type for long distances and backbone connections Explanation of OS categories • OS1 singlemode fiber for indoor installations, with higher attenuation than OS2, suitable for up to approximately 10 km at 1310 nm transmission, used within buildings and campus environments • OS2 singlemode fiber with low attenuation, specified for transmission at 1310 nm and 1550 nm, suitable for 40 km and more depending on transmit power and optical modules used, applied in backbone, metro, and long-distance connections Ask a product question