Newmen MTB microspline gen2 laisvoji eiga, įsk. guolis

Product Description NEWMEN freehub body Gen2 for MTB - for your MTB rear hub The NEWMEN freehub body Gen2 for MTB is a replacement or conversion part for your Evolution SL MTB rear hub by NEWMEN. It is available in a version for Shimano 11-speed, SRAM XD 12-speed and Shimano Micro Spline 12-speed. Unlike previous models, bearing clearance adjustment is no longer possible with the Gen2. Specifications:Series:Gen2Application:All Mountain, Enduro, Cross CountryFreehub:Shimano MTB, SRAM XD, Shimano Micro SplineGearing:8-/9-/10-/11-speed, 11-/ 12-speed, 12-speedFreehub Body Type:36 t ratchetTechnical Information:Freehub Body Material:aluminium, steelBearings:ball bearingsCompatibility:NEWMEN MTB 12 x 142 mm, straight pull, disc 6-bolt, 28 hole Gen2 hubs (Shimano MTB / SRAM XD)NEWMEN MTB 12 x 148 mm, straight pull, disc 6-bolt, 28 hole Gen2 hubs (Shimano MTB / SRAM XD)NEWMEN MTB 12 x 142 mm, straight pull, disc Center Lock, 28 hole Gen2 hubs (Shimano MTB / Shimano Micro Spline)NEWMEN MTB 12 x 148 mm, straight pull, disc 6-bolt, 28 hole Gen2 hubs (Shimano MTB / Shimano Micro Spline)Evolution X.A.25 wheelsEvolution A.30 wheelsEvolution A.35 wheelsTechnology:High Quality Deep Groove Ball Bearings: The bearing clearance has been reduced, which means that the balls still run in their specified race even with an increased axial load. Close-fitting seals on the outside ensure better protection against water and dirt ingress. The grease contains additional solid lubricants. As a result, the bearings run tougher when new, but this normalises after a breaking-in period of several hundred kilometres. Ratchet Freehub vs. Pawl Freehub: With NEWMEN ratchet freehubs, all teeth are always in use. In the worst case, it can happen that only one pawl is in use with a pawl freehub. NEWMEN ratchets are made of high-strength tool steel made in Germany. Manufacturer Numbers:Shimano:90485SRAM XD:90486Micro Spline:90484Contents:1 x NEWMEN Gen2 MTB freehub body2 x NEWMEN bearings Weight: black anodized | Shimano Micro Spline: 40 g black anodized | Shimano MTB: 45 g black anodized | SRAM XD: 45 g Manufacturer: MG-Components GmbH & Co. KG Am Mühlbach 5c 87487 Wiggensbach Germany info@mg-components.de