4043619627301

USB Type-C™ to HDMI adapter – DisplayPort Alt Mode – HDMI™ 2.0 – 4K@60Hz This adapter is designed for connecting an HDMI monitor or projector to a computer with a USB Type-C™ port that supports DisplayPort Alternate Mode. The video signal is converted directly from the USB-C™ port to HDMI via DisplayPort Alt Mode. The adapter can also be used with Thunderbolt™ 3 ports, which support DisplayPort signals via USB-C™. Host Port Requirements The USB Type-C™ port of the host device must support DisplayPort Alternate Mode. Use with Thunderbolt™ 3 is also possible. Without DisplayPort Alt Mode, video display is not possible. USB Version USB 3.2 Gen 1×1. The USB connection is used for power and configuration; the video signal itself is transmitted via DisplayPort Alt Mode and not via USB data transmission. Operation The DisplayPort signal from the host is routed via DisplayPort Alt Mode over the USB Type-C™ or Thunderbolt™ connection. The integrated ST + Parade PS176 chipset converts this signal to HDMI™ in hardware. The conversion takes place without a framebuffer or video compression, resulting in low latency and stable image display. Inputs 1× USB Type-C™ male (host). Outputs 1× HDMI A female (19-pin). Signal Direction USB Type-C™ / Thunderbolt™ → HDMI. Image and Video Support Support for resolutions up to 4096 × 2160 at 60 Hz. Common UHD resolutions such as 3840 × 2160 at 60 Hz (4K@60Hz) are supported. The final resolution and refresh rate depend on the source device and the connected HDMI display. Color and Image Formats Support for RGB and YCbCr 4:4:4 color formats up to 8-bit color depth, fitting within the bandwidth of HDMI™ 2.0 at 4K@60Hz. HDMI Version HDMI™ 2.0 – Premium High Speed (up to 18 Gbit/s). DisplayPort Support DisplayPort 1.2 via USB Type-C™ DisplayPort Alternate Mode and Thunderbolt™ 3. Audio Audio and video signals are output together via HDMI. Support for common digital audio formats such as LPCM, Dolby Digital, and DTS depends on the source and HDMI display. 3D Support Support for 3D display according to HDMI™ specification, depending on the source and display. Security Support for HDCP 1.4 and HDCP 2.2 for the display of protected content. Power Supply The adapter is powered via the USB Type-C™ or Thunderbolt™ port of the host device (USB bus powered). No external power supply is required. Cable Fixed cable with a length of approximately 20 cm (excluding connectors). The cable features an integrated ferrite core to reduce electromagnetic interference. Specifications • Product type: USB Type-C™ to HDMI adapter • Input: 1× USB Type-C™ male • Video output: 1× HDMI A female • Signal direction: USB Type-C™ / Thunderbolt™ → HDMI • Chipset: ST + Parade PS176 • HDMI version: HDMI™ 2.0 Premium High Speed • DisplayPort version: DisplayPort 1.2 (Alt Mode) • USB version: USB 3.2 Gen 1×1 • Max. resolution: 4K@60Hz • Color formats: RGB, YCbCr 4:4:4 • Color depth: up to 8-bit • 3D support: yes • HDCP: 1.4, 2.2 • HDMI data transfer rate: up to 18 Gbit/s • Power supply: USB bus powered • Cable length: approx. 20 cm • Ferrite core: yes • Color: Black Explanation of terms used • USB Type-C™: Reversible connector for data, video, and power transfer. • Thunderbolt™ 3: Interface via USB-C™ that supports DisplayPort signals and high bandwidth. • DisplayPort Alternate Mode: Method by which DisplayPort video signals are transmitted directly via a USB-C™ or Thunderbolt™ connection. • DisplayPort 1.2: DisplayPort specification with support for 4K resolutions up to 60 Hz. • HDMI™ 2.0 Premium High Speed: HDMI specification with a maximum bandwidth of 18 Gbit/s, suitable for 4K@60Hz. • HDCP: Security protocol for digital audio and video signals. • Ferrite core: Component that reduces electromagnetic interference on the cable. Ask a product question