Mavic Crossmax sl s 29 Boost Rad Set

Product Description The Mavic Crossmax SL S Disc 6-Bolt Wheelset - Fast, robust and very lightweight The Mavic Crossmax SL S is a 29" cross-country wheelset for 6-bolt disc brakes with 25 mm wide aluminium rims, which have been manufactured with a lot of attention to weight savings. Add to that quick acceleration, precise handling and durability. The wheels feature Boost hubs with self-aligning bearings and optimised spoke holes, with double butted straight pull spokes. Innovative rim bed technology eliminates the need for tubeless rim tape. Specifications:Application:Cross CountryWheel Size:29"Tyre Type:clincher tyreNumber of Spokes:24Brake Type:6-bolt discWheel Standard:BoostTubeless System:UST Tubeless ReadyTechnical Information - Rim:Rim Flange:without hookDimensions (ETRTO):25-622Inner Width:25 mmOuter Width:28.2 mmDepth:19.6 mmValve Hole Diameter:SV/Presta (6.5 mm)Rim Material:Aluminium (S6000, Maxtal)Technical Information - Front Hub:Type:Mavic InfinityOver Locknut Dimension:15 x 110 mm thru-axleBearings:self-aligning sealed cartridge bearingsBody Material:AluminiumTechnical Information - Rear Hub:Type:Mavic InfinityOver Locknut Dimension:12 x 148 mm thru-axleBearings:self-aligning sealed cartridge bearingsBody Material:AluminiumFreehub Body Material:AluminiumFreehub Body:Instant Drive 360Technical Information - Lacing:Front Lacing Pattern:2-crossRear Lacing Pattern:2-crossSpoke Type:straight pull / double-buttedSpoke Size:298 mmSpoke Material:steelNipple Type:Fore, integratedNipple Material:AluminiumApproved For:Weight Limit:120 kg total weight* (rider, gear & bike)Recommended Tyre Width:2.0 - 3.0" (50 - 76 mm) * recommended for increased durability Features:leading XC aluminium wheel from Mavicmore durability thanks to special surface treatmentuser-friendly tubeless system, no rim tape requiredasymmetric rim designspecial milling process for weight savingsrim joint welded (SUP)Infinity hub design for optimal lacingTorque Caps optionally availableASTM category 3: for off-road use with jumps up to 61 cm in heightTechnology:Maxtal Made exclusively for Mavic, this lightweight and strong aluminium alloy offers a higher strength-to-weight ratio than standard 6106 aluminium. Maxtal rims are 30% stiffer and weigh less than other aluminium rims. Black Shield Treatment This innovative surface treatment of MTB rims makes them twice more resistant to stone impacts and scratches. SUP SUP means Soudé Usiné Process and creates a much more stable and smoother rim joint. The rim joint is welded and then milled over to achieve an even braking surface. SUP prevents any brake judder and facilitates spoking and centring of the wheel. ISM 4D The ISM 4D (Inter Spoke Milling 4 Dimensions) milling process noticeably reduces weight and inertia without sacrificing durability. Mavic's exclusive patent also provides better aerodynamics with its new rim profile. ISM 4D rims are up to 50 g lighter and therefore offer more climbing performance. Their minimal inertia leads to maximum acceleration. Their extra aerodynamic rim profile results in significantly lower air resistance. Infinity Hub Design Infinity hubs from Mavic allow contactless lacing, which prevents noise development under load. At the same time, this design is lighter, stiffer and easier to maintain. Often you only need one spoke length per wheel set, so that an optimal spare parts supply is given. QRM Auto QRM Auto stands for Qualité de Roulements Mavic Auto, and is the latest bearing innovation from Mavic. These cartridge bearings with C3 internal clearance are double sealed. Their bearing clearance is automatically adjusted to guarantee smooth running without any play at all times. Instant Drive 360 The Instant Drive 360 freehub system is super light and ensures a fast power connection with an engagement angle of only 9° (road) or 15° (MTB). A large, non-contact rubber seal reduces friction. Fore Tapeless Tubeless Instead of drilling a conventional rim hole, the inner rim base is pressed inwards in one operation and provided with a thread into which the nipples are screwed directly. The outer rim base remains intact. This results in a stiffer and stronger wheel that means rim tape can be omitted, which also translates to weight savings. Models:29" set (front 15x110 Boost + rear 12x148 Boost) SRAM XD: Freehub:SRAM XDGearing:11-/12-speedManufacturer Number:P1613110Conversion Options:To convert to Shimano MTB, a Shimano freehub body is required. To convert to Shimano Micro Spline a separate Micro Spline freehub is required.Contents:1 x (front wheel and rear wheel)2 x UST valves with accessories2 x tool4 x spare spokes Weight: black | SRAM XD | Boost | 148 mm | 110 mm | Boost | 29" | 110 mm | SRAM XD | 110 mm | 148 mm: 1595 g Manufacturer: Mavic Group Germany GmbH Geigelsteinstraße 10 83080 Oberaudorf Germany info@mavic.com