Polyset Soudal | 250 grammes | 30211 - 103436

Fully ready-to-use kit for major repairs to metal, wood or polyester surfaces. The kit consists of 6 components: pre-accelerated polyester resin, fibreglass mat, mixing cup, hardener, brush and a spreading tool.Special featuresTwo-componentVery easy to processFast curingProvides very strong repairsApplicationRepairs of metal, polyester and wooden surfaces.Repairing small holes and dents in car body parts.Replacing or reinforcing rusted-through parts.Larger damage to boats, surfboards, etc.Instructions for useWhen used with Fibreglass Mat, cut the fibreglass mat to the correct size with ± 3 cm overlap on all sides. Fray the overlapping edges to achieve a gradual transition. Mix the desired amount of Poly Liquid with 2 to 4% hardener in the supplied cup until a homogeneous mixture without colour differences is obtained. Apply part of the mixture to the substrate using the brush. Soak the fibreglass mat and press it firmly against the substrate. Repeat this action after the previous layer has dried to achieve greater strength. Make sure that consecutive mats are always 1 cm larger. After hardening, sand with very coarse sandpaper or a grinding disc. For a good finish, apply a thin layer of Metal Plastic. Cleaning agent: Acetone. Repair possibility: With the same product.