Ceramicspeed coated pulley SRAM Eagle 1x12-speed 14 teeth

Product Description The CeramicSpeed Coated derailleur pulleys for SRAM Eagle 1x12-speed feature 14 teeth with a narrow-wide design and are based on smooth, resilient, and highly efficient ceramic bearings. Additionally, the bearing races of the bearings have a metallic coating. You can find hazardous substance labeling, hazard, safety, and application instructions for the supplied grease or oil under the product descriptions for CeramicSpeed All Round Grease or CeramicSpeed Oil for Derailleur Pulleys. Technical Information: Application: Cross Country, Enduro, All Mountain Compatibility: SRAM Eagle Teeth: 14 Gearing: 12-speed Material: aluminum Bearings: 626 ceramic Compatibility: SRAM Eagle 1x12-speed mechanical SRAM Eagle 1x12-speed AXS Features: high-performance bearings with special ceramic balls made of grade 3 silicon nitride (best achievable grade for ceramic bearings) CeramicSpeed bearing balls: 15% harder, 100% smoother, and 99% more resilient than commercially available ceramic balls ball bearing retainer made of reinforced polyamide, race made of hardened steel with polished channel additional metal-coated race for more performance and durability energy savings thanks to greatly reduced friction, higher top speed thanks to improved power transfer 14 teeth with narrow-wide profile handmade in Denmark Technology: Ceramic Bearings by CeramicSpeed CeramicSpeed ceramic balls are rounder, harder, smoother, lighter, and more resilient than steel balls and ceramic balls from other manufacturers. CeramicSpeed ceramic bearings therefore last 3 to 5 times longer than other commercially available bearings. All CeramicSpeed bearings are manufactured by hand in Denmark under clean room conditions and are subject to a strict four-stage control procedure. Among other things, the size of the ceramic balls is checked down to the thousandth of a millimeter. Tests are then carried out in the laboratory or preferably by professionals in training and competition. CeramicSpeed bottom brackets guarantee you the lowest possible friction, optimized power transfer, and maximum durability and also help you save watts and reach the finish line faster. It's not about seconds, it's about minutes! Coated CeramicSpeed coated products offer the ultimate in performance and durability. This is achieved by a unique coating that increases the hardness of the races, so that in combination with the smoothness of CeramicSpeed ball bearings, there is virtually no bearing wear. The coating is a metal layer that is 75% harder than hardened steel. It is applied very thinly (0.003 mm) and evenly over the entire surface of the race and is used both internally and externally for optimum results. Manufacturer Numbers: black: 103346 gold: 103347 Contents: 1 x CeramicSpeed SRAM Eagle Coated lower derailleur pulley 1 x CeramicSpeed SRAM Eagle Coated upper derailleur pulley 1 x CeramicSpeed oil, 15 ml dropper bottle 1 x CeramicSpeed grease, 5 ml syringe 1 x sticker sheet Manufacturer: CeramicSpeed Sport A/S Noergaardsvej 3 7500 Holstebro Denmark info@ceramicspeed.com