8718692602540

• Brand: Allteq • Product: 4 to 2 port HDMI matrix switch • Model: LK342PROAK • Input: 4 x HDMI A female • Output 1: 2 x HDMI A female • Output 2: 1 x 3.5 millimeter jack (AUX) • Housing material: metal • Color: black • Source selection: manual or with remote control • HDMI version: 1.4 High Speed • HDMI resolution: 480p, 720p, 1080i, 1080p and 1920p • Frequency: 24 hertz, 50 hertz or 60 hertz • Maximum cable length: 15 meters • Color depth: 12 bit Deep Color • Maximum transfer rate: 10.2 Gbit per second • HD Audio format: PCM, Dolby Digital, DTS Digital Surround, simultaneous audio output, HDMI/MHL dual mode input, CEC and HDCP • Length: 80 millimeters • Width: 51 millimeters • Height: 20 millimeters • Includes: remote control, power adapter and manual • Warranty: 5 years Allteq LK342PROAK 4 to 2 port HDMI matrix switch The Allteq LK342PROAK 4 to 2 port HDMI matrix switch makes it easy to combine 4 different HDMI signals and connect them to two screens. The switch is equipped with 4 HDMI A female ports, to which input cables are connected. These can be, for example, a game console, laptop, digital receiver, and a hard disk recorder. The other two HDMI A ports on the device are for output. HDMI cables connected to, for example, monitors or televisions can be connected here. Audio can also be output separately via an available 3.5 millimeter jack channel. Product features The Allteq LK342PROAK 4 to 2 port HDMI matrix switch can be operated using buttons on the device or by using the remote control. This remote control is supplied with the switch, along with a manual and a power adapter. The Allteq LK342PROAK 4 to 2 port HDMI matrix switch features HDMI version 1.4, which allows data to be processed at speeds of up to 10.2 Gbit per second. With the available screw holes, it is possible to mount the device on the wall or in another location. Features • Distributes 4 HDMI signals to 2 devices • Equipped with a built-in amplifier to provide optimal signal support • Includes remote control for use • Can be used directly without software installation Technical information The Allteq LK342PROAK 4 to 2 port HDMI matrix switch has a length of 80 millimeters, is 51 millimeters wide, and 20 millimeters high. For signal input, there are 4 HDMI A female ports. Output is via 2 HDMI A female ports and a 3.5 millimeter jack connection. The switch has a metal housing and is finished in a black color. For optimal signal use, the HDMI cable can have a maximum length of 15 meters. Resolutions supported by the switch are 480p, 720p, 1080i, 1080p, and 1920p. Please note for Ziggo customers: the signal from a Ziggo Horizon Box cannot be split due to hardware protection by the manufacturer of this set-top box. Ask a product question