4064727469515

Charging cable Type 2 – Mode 3 – up to 22 kW Powerful and robust charging cable for fast and reliable charging of electric vehicles and plug-in hybrids. Thanks to the 3-phase cable construction, high-power charging is possible, while lower charging capacities are also supported. This charging cable is developed and manufactured in Germany and comes with a 10-year warranty. Application For charging electric vehicles and plug-in hybrids with a Type 2 connection via a charging station, charging pole, or wallbox. Suitable for use at public and private charging points. Variants such as length and design are chosen via the select box. Assembly / Use / Operation The Type 2 coupler is connected to the vehicle and the Type 2 plug to the charging point. The charging mode is Mode 3 according to IEC 61851. The charging process starts and stops automatically via the vehicle electronics, without an external control box. Design / Connections • Connections: Type 2 coupler (vehicle side) and Type 2 plug (charging side) according to IEC 62196 • Charging mode: Mode 3 according to IEC 61851 • Cable type: ÖLFLEX® CHARGE, smooth cable Technical specifications • Maximum charging power: up to 22 kW • Maximum current: 32 A • Rated voltage: 440 V AC • Charging: supports 3-phase charging up to 22 kW, 3-phase charging up to 11 kW, and 1-phase charging up to 7.4 kW and 3.7 kW • Conductor cross-section: 6 mm² • Cable length: 5 m • Protection class: IP55 • IP55: protected against dust ingress and against water jets from all directions, suitable for outdoor use • Operating temperature: −40 °C to +50 °C • Resistance: oil and moisture resistant • Fire behavior: flame retardant • Origin: Made in Germany • Warranty: 10 years Certifications & Standards • IEC 62196-1:2022 – General requirements for plugs and vehicle connectors for electric charging • IEC 62196-2:2022 – Specifications for Type 2 connectors for AC charging of electric vehicles • IEC 61851-1:2023 – Requirements for conductive charging of electric vehicles (Mode 3) • IEC 62893-1:2017 – Requirements for cables for charging electric vehicles • DIN EN 17186:2019 – Requirements for vehicle charging infrastructure and charging connectors • CE – Conforms to European safety and conformity requirements • RoHS (2011/65/EU) – Restriction of hazardous substances in electrical equipment • LVD (2014/35/EU) – Low Voltage Directive for electrical safety Package contents • Charging cable with protective cap • Operating manual Special features • Ergonomically designed, solid rubber handles • Protective cap on the Type 2 coupler on the vehicle side against dirt and moisture • Silver-coated, corrosion-resistant contact pins for reliable power transfer • Drive-over resistant cable and plug construction for intensive daily use • Lightweight design for easy handling and storage Ask a product question