4049759026202

This fiber optic patch cable is intended for creating a permanent fusion splice connection between a fiber optic cable and an SC connector within a structured cabling environment according to ISO IEC 11801. The cable is a simplex design with one SC connector featuring an 8° APC polish angle and is suitable for singlemode OS2 G652D applications. This is a fiber optic pigtail, with one end terminated with a connector and the other end intended for splicing or fixed installation. The LSZH coating makes the fiber suitable for installations where low smoke emission and halogen-free material are required. Specifications • Cable type fiber optic pigtail • Design simplex • Fiber type singlemode 9/125 µm • Category OS2 G652D • Number of fibers 1 • Connector side 1 SC APC • Connector side 2 unterminated for splice connection • Connector standard IEC 61754-4 • Connector finish APC • APC polish angle 8° • Connector material ceramic ferrule • Cable type compact buffer 900 µm • Cable diameter 0.9 mm • Jacket material LSZH • Jacket construction loose buffer with primary coating • Jacket color yellow • Strain relief injected bend protection • Maximum tensile strength 3 N • Bend radius dynamic 20× OD • Bend radius static 10× OD • Operating temperature −20 to 70 °C • Quality class B/1 according to IEC 61753-021-2 • EMI immunity complete insensitivity to electrical and electromagnetic interference • Test status individual measurement report available IEC standards • IEC 60793-2 specification of fiber optic core and fiber structure • IEC 61754-4 definition of SC connector interface • IEC 61753-021-2 performance class B/1 for singlemode connectors EN standards • EN 50265-2-1 flame retardant behavior of cable jackets Explanation of terms • Pigtail fiber optic cable with a pre-assembled connector on one side and a bare fiber on the other side for splicing • Simplex single optical fiber for data transmission in one direction • Singlemode 9/125 µm fiber optic type with small core for long-distance transmission • OS2 singlemode category for low-loss fibers in backbone and campus networks • G652D fiber specification for standard singlemode with low attenuation at 1310 nm and 1550 nm • APC connector finish with angled polish for minimal back reflection • APC polish angle 8° angled polish angle that directs reflections away from the fiber core • LSZH jacket material with low smoke emission and no halogen-containing substances • Ceramic ferrule precision holder that precisely centers the optical fiber for stable signal transmission • EMI immunity signal transmission via light without interference from electrical and electromagnetic fields • Bend radius minimum cable curvature to prevent additional attenuation and fiber damage • ISO/IEC 11801 international standard describing the structure, topology, and component classification of structured cabling systems for data communication networks in buildings and campuses General explanation of fiber optic cables • LC compact fiber optic connector with click-locking for high port density • SC rectangular fiber optic connector with push-pull locking for patch panels • ST round fiber optic connector with bayonet locking for older installations • E2000® fiber optic connector with protective cap for low reflection and extra safety • MPO / MTP multiple fiber optic connector for high fiber density in data centers • Simplex single optical fiber for data transmission in one direction • Duplex two optical fibers for simultaneous communication in both directions • Multimode fiber optic cable fiber optic type for short to medium distances within buildings • Singlemode fiber optic cable fiber optic type for long distances and backbone connections Explanation of OS categories • OS1 singlemode category with transmission around 1310 nm up to approximately 10 km • OS2 singlemode category with transmission around 1310 nm and 1550 nm, suitable for distances of 40 km and more depending on the modules used Ask a product question