4049759026240

This fiber optic patch cable is designed for creating short single-mode fiber optic connections between passive cabling ports and active network equipment within a structured cabling environment according to ISO IEC 11801. The cable is a duplex configuration with ST connectors on both sides and is suitable for single-mode OS2 (9/125 µm) according to ITU-T G.652.D applications. The connection is an ST-ST fiber optic link for point-to-point connections or for connecting patch panels to active network ports. The LSZH jacket is halogen-free, low-smoke, and flame-retardant according to IEC and EN standards. The cable is equipped with aramid strain relief for mechanical stability and long-term reliability. Specifications • Cable type fiber optic patch cable • Configuration duplex • Number of fibers 2 • Connector side A ST male • Connector side B ST male • Connector standard IEC 61754-2 • Connector finish UPC (no APC version) • Fiber type single-mode 9/125 µm • Category OS2 according to ITU-T G.652.D • Cable construction duplex • Cable type I-V(ZN)H • Cable diameter 3.0 mm • Jacket material LSZH • Halogen-free according to IEC 60754-1 and EN 50267-2-3 • Low-smoke according to IEC 61034-1 • Flame-retardant according to EN 50265-2-1 • Quality class single-mode Grade B/2 according to IEC 61753-1 • Maximum tensile strength 160 N • Bend radius dynamic 20× OD • Bend radius static 10× OD • Operating temperature −20 to 70 °C • Storage temperature −20 to 85 °C • Maximum insertion loss 1310 nm < 0.3 dB • Test 100% tested with individual measurement protocol IEC standards • IEC 60793-2-50 specification of single-mode optical fiber • IEC 61754-2 definition of ST connector interface • IEC 61753-1 performance requirements single-mode connectors • IEC 60754-1 determination of halogen content • IEC 61034-1 determination of smoke emission Explanation of terms • ST round fiber optic connector with bayonet locking • Duplex two optical fibers for simultaneous bidirectional communication • Single-mode 9/125 µm fiber type for long distances with low attenuation • OS2 single-mode category suitable for transmission at 1310 and 1550 nm over long distances • ITU-T G.652.D standard single-mode fiber with low water peak characteristics • LSZH Low Smoke Zero Halogen jacket without halogen and with low smoke emission • Aramid strain relief reinforcement yarn for mechanical protection of the fiber • Insertion loss optical attenuation at transition between fiber optic components Explanation of OM categories (multimode fiber optic) OM stands for Optical Multimode and describes the bandwidth class of multimode fiber optic. • OM1 62.5/125 µm – 1G up to approx. 275 m. • OM2 50/125 µm – 1G up to approx. 550 m, 10G up to approx. 82 m. • OM3 laser-optimized – 10G up to approx. 300 m at 850 nm. • OM4 enhanced laser-optimized fiber – 10G up to approx. 400–550 m at 850 nm. • OM5 wideband multimode suitable for SWDM technology. Explanation of OS categories (single-mode fiber optic) OS stands for Optical Single-mode and describes the attenuation class of single-mode fiber optic. • OS1 single-mode fiber for indoor installations with typical attenuation ≤ 1.0 dB/km at 1310 nm. • OS2 low water peak single-mode fiber according to ITU-T G.652.D with typical attenuation ≤ 0.4 dB/km at 1310 nm and ≤ 0.3 dB/km at 1550 nm. General explanation of fiber optic cables • Fiber optics transport data via light signals instead of electrical signals. • Single-mode fiber optics use a single light path and are suitable for long distances and backbone connections. • Multimode fiber optics use multiple light paths and are suitable for shorter distances within buildings. • Simplex single optical fiber for data transmission in one direction. • Duplex two optical fibers for simultaneous communication in both directions. Ask a product question