4049759027780

This fiber optic patch cable is intended for making a short connection between a passive fiber optic interface and an active network port within a structured cabling environment according to ISO IEC 11801. The cable is designed as a duplex connection with an SC-duplex connector on one side and an ST connector on the other side and is suitable for multimode OM3 applications. The connection concerns an SC-ST fiber optic connection and is suitable for use with standard fiber optic equipment such as switches, media converters, and patch panels. The LSZH jacket makes the cable suitable for installations where low smoke emission and halogen-free material are required. Specifications • Cable type fiber optic patch cable • Design duplex for simultaneous transmission and reception • Fiber type multimode 50/125 µm • Category OM3 • Number of fibers 2 • Connector side 1 SC-duplex • Connector side 2 ST • Connector standard IEC 61754-4 • Connector finish UPC • Connector material ceramic ferrule • Cable type I-V(ZN)H • Cable diameter 3.0 mm • Jacket material LSZH • Jacket construction duplex zip-twin • Jacket color aqua • Strain relief aramid yarn with crimped bend protection • Maximum tensile strength 160 N • Bend radius dynamic 20× OD • Bend radius static 10× OD • Operating temperature −20 to 70 °C • Storage temperature −20 to 85 °C • Quality class multimode A/1 according to IEC 61753-222-2 • EMI immunity complete insensitivity to electrical and electromagnetic interference • Test status 100% tested with individual measurement report IEC standards • IEC 60793-2 specification of fiber optic core and fiber structure • IEC 60793-2-10 definition of multimode fiber type A1a.2 and A1a.3 for OM3 • IEC 61754-4 definition of SC connector interface • IEC 61753-222-2 performance class A/1 for multimode connectors • IEC 60754-1 halogen-free properties • IEC 61034-1 low smoke emission EN standards • EN 50265-2-1 flame-retardant behavior of cable jackets • EN 50267-2-3 halogen-free jacket materials Explanation of terms • SC-ST fiber optic connection with an SC connector on one side and an ST connector on the other side • Duplex two separate optical fibers where one fiber transmits and the other receives • Multimode 50/125 µm fiber optic type with 50 µm core for higher bandwidths within building installations • OM3 laser-optimized multimode category according to IEC 60793-2-10 type A1a.2 and A1a.3 • UPC straight polishing of the connector for low insertion loss • LSZH jacket material with low smoke emission and without halogen-containing substances • Ceramic ferrule precision holder that precisely centers the optical fiber for stable signal transmission • EMI immunity signal transmission via light without interference from electrical and electromagnetic fields • Bend radius minimum cable curvature to prevent additional attenuation and fiber damage • A/1 quality class quality class for multimode connectors with strict tolerances • I-V(ZN)H cable type European designation for halogen-free fiber optic cable for indoor installations • ISO/IEC 11801 international standard describing the structure, topology, and component classification of structured cabling systems for data communication networks in buildings and campuses General explanation of fiber optic cables • LC compact fiber optic connector with snap lock for high port density • SC rectangular fiber optic connector with push-pull lock for patch panels • ST round fiber optic connector with bayonet lock for older installations • E2000® fiber optic connector with protective cap for low reflection and extra safety • MPO / MTP multiple fiber optic connector for high fiber density in data centers • Simplex single optical fiber for data transfer in one direction • Duplex two optical fibers for simultaneous communication in both directions • Multimode fiber optic fiber type for short to medium distances within buildings • Singlemode fiber optic fiber type for long distances and backbone connections Explanation of OM categories • OM1 multimode fiber 62.5/125 µm suitable up to approx. 275 m at 1 Gb and approx. 33 m at 10 Gb • OM2 multimode fiber 50/125 µm suitable up to approx. 550 m at 1 Gb and approx. 82 m at 10 Gb • OM3 laser-optimized multimode fiber suitable up to approx. 300 m at 10 Gb, approx. 100 m at 40 Gb, and approx. 100 m at 100 Gb • OM4 improved laser-optimized multimode fiber suitable up to approx. 400 m at 10 Gb and approx. 150 m at 40 Gb • OM5 wideband multimode fiber with the same distances as OM4, designed for transmission over multiple short wavelengths within a single fiber according to SWDM Ask a product question