4049759022204

This fiber optic patch cable is intended for establishing a short connection between a passive fiber optic interface and an active network port within a structured cabling environment according to ISO IEC 11801. The cable is designed as a duplex connection with 2× LC-duplex connectors and is suitable for multimode OM2 applications. The connection is an LC-LC fiber optic connection and is suitable for use with standard fiber optic equipment such as switches, SFP modules, and patch panels. The LSZH jacket makes the cable suitable for installations where low smoke emission and halogen-free material are required. Specifications • Cable type fiber optic patch cable • Design duplex for simultaneous sending and receiving • Fiber type multimode 50/125 µm • Category OM2 • Number of fibers 2 • Connector side 1 2× LC-duplex • Connector side 2 2× LC-duplex • Connector standard IEC 61754-20 • Connector finish UPC • Connector material ceramic ferrule • Cable type I-V(ZN)H • Cable diameter 2.0 mm • Jacket material LSZH • Jacket construction zip-twin • Jacket color orange • Strain relief aramid yarn • Maximum tensile strength 160 N • Bend radius dynamic 20× OD • Bend radius static 10× OD • Operating temperature −20 to 70 °C • Storage temperature −20 to 85 °C • Quality class multimode A/1 • EMI immunity complete insensitivity to electrical and electromagnetic interference • Insertion loss 850 nm less than 0.3 dB • Compliance TIA EIA-568-B.3 and ISO IEC 11801 • Fire classification GR-409-Core and OFNR-UL CSA FT4 • Test 100% tested with individual measurement report IEC standards • IEC 60793-2 specification for optical fiber core and fiber structure • IEC 60793-2-10 definition of OM2 fiber type A1a.1 • IEC 61754-20 definition of LC connector interface • IEC 61753-222-2 performance class A/1 for multimode connectors • IEC 60754-1 halogen-free properties • IEC 61034-1 low smoke emission EN standards • EN 50265-2-1 flame retardant behavior of cable jackets • EN 50267-2-3 halogen-free jacket materials Explanation of terms • 2× LC-duplex two LC connectors per side for a full duplex fiber optic connection • Duplex two separate optical fibers where one fiber transmits and the other receives • Zip-twin cable construction where two optical fibers are connected in parallel for clear installation • Multimode 50/125 µm fiber optic type with smaller core than OM1 for higher bandwidth • LSZH jacket material with low smoke emission and without halogen-containing substances • Ceramic ferrule precision holder that precisely centers the optical fiber for low attenuation and high reliability • EMI immunity signal transmission via light without interference from electrical currents and magnetic fields • Bend radius minimum cable curvature to prevent micro-bends, extra attenuation, and fiber damage • Bend radius static minimum bend after the cable is installed and fixed • Bend radius dynamic minimum bend during installation or movement of the cable • A/1 quality class high quality class for multimode connectors with strict tolerances • UPC flat polished connector finish for stable multimode signal transmission • I-V(ZN)H cable type European designation for halogen-free indoor fiber optic cable • TIA EIA-568-B.3 American standard for structured fiber optic cabling • GR-409-Core specification for fiber optic cables in telecom environments • OFNR FT4 fire classification for use in cable trays and risers General explanation of fiber optic cables • LC compact fiber optic connector with click lock for high port density • SC rectangular fiber optic connector with push-pull lock for patch panels • ST round fiber optic connector with bayonet lock for older installations • E2000 fiber optic connector with protective cap for low reflection and extra safety • MPO MTP multiple fiber optic connector for high fiber density in data centers • Simplex single fiber for data transmission in one direction • Duplex two fibers for simultaneous communication in both directions • Multimode fiber fiber optic type for short to medium distances within buildings • Singlemode fiber fiber optic type for long distances and backbone connections Explanation of OM categories • OM1 multimode fiber 62.5/125 µm suitable up to approximately 275 m at 1 Gb and approximately 33 m at 10 Gb • OM2 multimode fiber 50/125 µm suitable up to approximately 550 m at 1 Gb and approximately 82 m at 10 Gb • OM3 laser-optimized multimode fiber suitable up to approximately 300 m at 10 Gb • OM4 improved laser-optimized multimode fiber suitable up to approximately 400 m at 10 Gb • OM5 wideband multimode fiber with support for multiple wavelengths Ask a product question