Bike7 - Pro Seal 125ml

Pro Seal is a latex emulsion that quickly close holes in all tubeless tires, whether it is mountain bike or racing tires. Pro Seal Sealant is applied via the valve or poured directly into the partially dismantled band and ensures an effective immediate repair.

• To be used in both "tubeless" and "tubeless ready" tires.
• Closed holes up to 8 mm.
• Compatible with CO2 patterns.
• Contains natural latex, is not corrosive or toxic.
• Pressure resistant up to 7 bar / 100 psi.

User manual:

Disassembled band:

New tire: Clean the inside with Bike7 degrease and wipe off. Mount one side of the tire and keep the wheel straight. Shake the bottle powerfully and pour the required amount directly into the tire, keeping the bottle upright. Mount the tire completely.

Mounted band, with the 125 ml bottle:

Remove the valve core and place the wheel, with the valve down, vertically without pressing the rim to the ground. Shake the bottle powerfully, cut the spout 2 mm from the end and pour the required amount directly through the valve while holding the bottle upright. Put the valve back together.

Pump band:

Carefully turn the wheel a full revolution. Pump the tire until it is in the right place. Turn and wobble the wheel for ± 1 minute for a good distribution of the Bike7 Pro Seal. Bring the tire to the desired voltage.

Road band (23-30 mm): 60 ml / band and MTB Band (29 ", 2.0-2.4): 100 ml / band.

A larger amount is recommended for larger tires. A larger amount of product can be used for better protection.

Effective lifespan between 3 and 8 months, depending on the circumstances. Check the fluidity of the product every month and add it if necessary. Artikelnummer: 977400924 EAN: 5414195014790 Merken: Bike7 Model: PRO SEAL Fietstype Triathlon / TTTrekkingfietsVakantiefietsLigfietsRacefietsMountainbikeKinderfietsHybridefietsGravelfietsVouwfietsFixieBakfietsElektrischefietsCyclocrossfietsStadsfietsChopperfietsTransportfietsBMX

Content (ML): 125