8718692680326

• Brand: Allteq • Product: 4K via UTP • Set contents: 1 x receiver, 1 x transmitter and power adapters • Transmitter input: 1 x HDMI A female • Transmitter output: 1 x RJ45 female • Receiver input: 1 x RJ45 female • Receiver output: 1 x HDMI A female • Colour: black • Power supply: mains power • Maximum resolution: 3840 x 2160 (4K) • Frequency: 30 hertz • HD Audio format: LPCM, Dolby Digital, DTS Digital Surround and 3D • Maximum cable length resolution HD 1080P: 70 meters • Maximum cable length resolution 4K: 40 meters • Supported: 3D and 4K • HDMI version: 1.4 Super Speed • Maximum data rate: 10.2 Gbit per second • Important: does not work in combination with an HDMI switch • Warranty: 5 years Allteq 4K via UTP With the Allteq 4K via UTP, it is possible to transmit an HDMI signal for video and audio via a network cable. The set consists of two units, one of which serves as a transmitter and one as a receiver. Both devices have a connection for signal input and output. The transmitter is equipped with an HDMI A female port, to which a cable for signal input is connected. The output is provided via an RJ45 female connection, to which a network cable can be attached. The receiver, on the other hand, is equipped with an RJ45 female connection for signal input over a network cable. For output to a television, monitor, or projector, an HDMI A female connection is available. Features The Allteq 4K via UTP is equipped with HDMI version 1.4 Super Speed. This makes it possible to transmit a signal with a maximum data rate of 10.2 Gbit per second. The extender supports a maximum resolution of 3840 x 2160P, or 4K. For transmitting a 4K resolution, a maximum distance of 40 meters can be maintained. It is also possible to extend an HDMI signal over a distance of up to 70 meters. This is only possible with a resolution of 1080P. The set supports the use of 3D and comes with adapters. Characteristics • Intended for transmitting an HDMI signal via UTP • Equipped with a built-in amplifier to provide optimal signal support • Enables transmission of a video and audio signal over a distance of up to 70 meters • Can be used directly without software installation Technical information The Allteq 4K via UTP supports the use of 3D and 4K resolutions. The set consists of two devices that are separately powered with included mains power adapters. The maximum resolution that can be transmitted is 3840 x 2160 (4K). The set supports various HD audio formats such as LPCM, Dolby Digital, DTS Digital Surround, and 3D. The device cannot be used in combination with a switch and does not support ARC. Ask a product question