Soudal polyset | 1 kg; 30214 - 103437

Fully ready-to-use set for large repairs to metal, wood, or polyester surfaces. The set consists of 6 components: pre-accelerated polyester resin, fiberglass mat, mixing cup, hardener, brush, and a spreading spatula.Special featuresTwo-componentVery easy to processFast curingProvides very strong repairsApplicationRepairs of metal, polyester, and wooden surfaces.Repairing small holes and dents in car body parts.Replacing or reinforcing rusted-through parts.Larger damage to boats, surfboards, etc.Instructions for useWhen used with Fiberglass Mat, cut the fiberglass mat to the correct size with ± 3 cm overlap on all sides. Fray the overlapping edges to create a gradual transition. Mix the desired amount of Poly Liquid with 2 to 4% hardener in the supplied cup until a homogeneous mixture without color differences is achieved. Apply some of the mixture to the substrate using the brush. Saturate the fiberglass mat and press it firmly against the substrate. Repeat this action, after the previous layer has dried, to achieve greater strength. Make sure that consecutive mats are always 1cm larger. After curing, sand with very coarse sandpaper or a grinding wheel. For a good finish, apply a thin layer of Metal Plastic. Cleaning agent: Acetone. Repair possibility: With the same product.