Vortex pro series mounting rings pr30-m 30 mm medium

With the Vortex PR30-M you can easily mount your rifle scope on a rifle thanks to two medium mounting rings. Designed for 30mm tubes, these rings fit perfectly on Weaver and Picatinny rails. Once you mount the Vortex PR30-M, the center of the mounting ring is 25.4mm above the rails. Tyto montážní kroužky, dostupné v různých výškových variantách (konzultujte související produkty), nabízejí bezkonkurenční spolehlivost a přesnost, částečně díky vysoce kvalitnímu eloxovanému hliníku, ze kterého jsou vyrobeny.

Důležité vlastnosti Vortex PR30-M

• Kompatibilní s kolejnicemi Weaver i Picatinny
• Made from strong anodized aluminum for maximum durability
• Mounting height of 25.4mm for optimal performance
• Available in multiple height variants for personal adjustment
• Ideální pro trubky o tloušťce 30 mm

Using the Vortex mounting rings is simple and efficient. First remove the top half of the ring and loosen the ring clamp at the bottom. Attach the assembly to a Weaver or Picatinny rail. Then place your scope on the lower ring halves and place the upper ring halves loosely on top. Fine-tune the scope to the desired position and then tighten the mounting screws securely to keep everything in place. This way your riflescope is ready for use quickly and securely.

With the Vortex PR30-M you enjoy an unlimited Lifetime VIP warranty. This guarantee is a 'Very Important Promise' to you as a customer. Vortex promises to repair your product if a defect occurs. If repair proves impossible, replacement will take place with a product in perfect condition that is at least equivalent, if not better. The VIP warranty does not cover loss, theft, malicious damage or cosmetic damage without affecting performance.

Dodávka zahrnuje:

• 2x střední montážní kroužky pro 30mm trubku
• 2x šroub
• 1x imbusový klíč
• 1x Průvodce rychlým startem
• 1x blistrové balení