8720017063813

Brand: Allteq Product: PIR Sensor type: PIR (Passive Infrared) Protection: IP20 Motion detection: 0.6 - 1.5 m/s Mounting: built-in (ceiling mounting) Recommended mounting height: 1.8 - 2.5 meters Diameter: Ø15 mm Color: white Length: 24 mm Light sensitivity: Adjustable 2-2000 lx Max viewing angle: 360° Max. detection range: 6 meters Shut-off delay: Adjustable 5-480 s Power: 1 - 100W (incandescent lamp), 1 - 100W (LED) Minimum load: 1W Power supply: 230 V Warranty: 5 years Allteq With the Allteq PIR built-in, it is possible for lighting to be easily switched on by movement. The features of this product mean that the lighting can be switched on in the dark, but also in daylight. The detector is equipped with a passive infrared sensor. This means that the detector only uses energy when motion is detected. At other times, the device consumes virtually no energy. This built-in sensor comes with a converter and connection material for linking to the mains. The device has an adjustable delay for switching off the lighting. This shut-off delay is a minimum of 5 seconds and a maximum of 480 seconds. Motion is detected within a timeframe of 0.6 milliseconds to a maximum of 1.5 milliseconds. The adjustable light sensitivity ranges between 2 lux and 2000 lux. Usage This product is very easy to install and can be placed in suspended ceilings or in lamps. The device is very compact and can therefore be easily concealed. The dimensions of the sensor are only 15 millimeters in diameter with a height of 24 millimeters. These dimensions make it very easy to place it in, for example, a suspended ceiling. A PIR sensor is used for motion detection. This type of sensor stands for Passive Infrared. The light sensitivity of the sensor can be adjusted so that the device can be used in daylight or in brightly lit areas. By setting the sensor to night mode, it can only be used when it is dark. Features Detection range 6 meters IP20 protection Suitable for built-in Other information The Allteq PIR built-in has a range of 6 meters for motion detection. Due to the shape of the sensor, movements can be detected in 360 degrees. This device is powered by mains electricity with a voltage of 230 volts. The minimum load for this detector is 1 W, which makes the device also suitable for use in combination with LED lighting. The switching capacity for LED lighting is between 1 W and 100 W maximum. For incandescent lamps, a switching capacity of a minimum of 1 W and a maximum of 100 W applies. The warranty is 5 years. Ask a product question