1
от
2
Зареждане ...
Beast Components Ultra Bar IR 31.8 Carbon Handlebars
Спойка
€509,99
вкл. ДДС
Единство
BEAST Components | SKU:
4260533298909
Beast Components Ultra Bar IR 31.8 Carbon Handlebars - S Пристъпи и се изпраща веднага щом е отново на склад.
Разпродадени
В момента не е наличен
Сигурно плащане
Producteigenschappen
Описание
Product Description The Ultra Bar IR 31.8 carbon handlebars from BEAST Components for a high-end cockpit. The Ultra Bar IR from BEAST Components are comfortable road bike and gravel handlebars. Interface Reinforcement increases the durability of contact points with other components, such as the stem. The wide contact surface on the upper bar relieves the pressure on the heel of your hand during recovery phases, as the pressure points are larger. The diameter of the drops increases from top to bottom. This also relieves the strain on your hands. They help you to achieve a more ergonomic lower handlebar position, while at the same time preventing numb, tingling fingers. Specifications: Application: Road, Gravel Width: 380 mm, 400 mm, 420 mm, 440 mm, 460 mm (centre-to-centre) Note: With BEAST Components, the handlebar width is measured in the centre of the shift/brake lever attachment. Stem Clamp: 31.8 mm Technical Information: Drop: 128 mm Reach: 80 mm Backsweep: 2° Flare: 4° Cable Routing: external Material: carbon Approved For: Stem Clamp Width: 100 mm Features: carbon handlebars for high-performance road bikes and gravel bikes increased safety compared to the predecessor due to Interface Reinforcement at all contact points with 128 mm drop, 80 mm reach and 4° flare wide contact area on top link large-diameter drops incremental drop curvature handmade in Germany Technology: Intended Use Category 2 Suitable for use on paved paths made of sand, gravel or similar surfaces (e.g. forest paths, dirt roads). Roots, thresholds, stones and steps must not be present or only to a small extent. The wheels are in constant contact with the ground. Contact with the ground may be lost briefly due to minor irregularities such as roots. Interface Reinforcement The contact points of handlebars and seatposts are covered with a protective layer. This withstands punctual loads and higher tightening torques. It also compensates for higher tolerances. Manufacturer Numbers: 38 cm: UB31380 40 cm: UB31400 42 cm: UB31420 44 cm: UB31440 46 cm: UB31460 Contents: 1 x BEAST Components Ultra Bar IR 31.8 handlebars Weight: carbon-black | 440 mm: 227 g UD carbon-black | 440 mm: 259 g UD carbon-black | 460 mm: 235 g Manufacturer: Black East GmbH Hermann-Mende-Straße 5-7 01099 Dresden Germany info@beast-components.de
Beast Components Ultra Bar IR 31.8 Carbon Handlebars - S Пристъпи и се изпраща веднага щом е отново на склад.
Още от
BEAST Components
Вижте пълната гама от BEAST Components в Тормино
Вижте всички BEAST Components продукти →Често задавани въпроси
Какви са времето за доставка и разходите за доставка?
Какви са времето за доставка и разходите за доставка?
- Поръчани до 12:00 ч.: Изпраща се на следващия работен ден от нашия склад в Холандия.
- Доставка по целия свят: Доставяме до цял свят на атрактивни цени.
- Транспортни разходи: Вижте нашия тарифен план за текущите разходи за доставка.
Как да върна поръчката си?
Как да върна поръчката си?
- 14 дни период за размисъл: Не сте доволни? Връщане до 14 дни.
- Неизползван: Продуктът трябва да е неупотребяван в оригиналната си опаковка.
- Външна опаковка: Не поставяйте етикети директно върху опаковката на продукта, използвайте външната опаковка.
Този продукт наличен ли е?
Този продукт наличен ли е?
Състоянието на наличността се показва в реално време с продукта. "На склад" ли е? След това ще изпратим на следващия работен ден след вашата поръчка.
Мога ли да поръчам за бизнес или по-големи количества?
Мога ли да поръчам за бизнес или по-големи количества?
- Бизнес: Да, предлагаме опции за доставка на едро и доставка. Вижте нашите бизнес възможности.
- Обемна отстъпка: За 2+ броя автоматично получавате отстъпка. Вижте градуираната таблица в горната част на страницата.
Защо Тормино?
Tormino B.V.
Холандска компания
Pletterij 35 F, 2211 JT Noordwijkerhout
Note: pickup or visiting not possible
Since 2015
Over 10 years as a trusted Dutch online store
574 000+ продукта
Една от най-големите гами аксесоари за велосипеди в Европа
Сигурно плащане
100% сигурна страница за плащане
Product Description The Ultra Bar IR 31.8 carbon handlebars from BEAST Components for a high-end cockpit. The Ultra Bar IR from BEAST Components are comfortable road bike and gravel handlebars. Interface Reinforcement increases the durability of contact points with other components, such as the stem. The wide contact surface on the upper bar relieves the pressure on the heel of your hand during recovery phases, as the pressure points are larger. The diameter of the drops increases from top to bottom. This also relieves the strain on your hands. They help you to achieve a more ergonomic lower handlebar position, while at the same time preventing numb, tingling fingers. Specifications: Application: Road, Gravel Width: 380 mm, 400 mm, 420 mm, 440 mm, 460 mm (centre-to-centre) Note: With BEAST Components, the handlebar width is measured in the centre of the shift/brake lever attachment. Stem Clamp: 31.8 mm Technical Information: Drop: 128 mm Reach: 80 mm Backsweep: 2° Flare: 4° Cable Routing: external Material: carbon Approved For: Stem Clamp Width: 100 mm Features: carbon handlebars for high-performance road bikes and gravel bikes increased safety compared to the predecessor due to Interface Reinforcement at all contact points with 128 mm drop, 80 mm reach and 4° flare wide contact area on top link large-diameter drops incremental drop curvature handmade in Germany Technology: Intended Use Category 2 Suitable for use on paved paths made of sand, gravel or similar surfaces (e.g. forest paths, dirt roads). Roots, thresholds, stones and steps must not be present or only to a small extent. The wheels are in constant contact with the ground. Contact with the ground may be lost briefly due to minor irregularities such as roots. Interface Reinforcement The contact points of handlebars and seatposts are covered with a protective layer. This withstands punctual loads and higher tightening torques. It also compensates for higher tolerances. Manufacturer Numbers: 38 cm: UB31380 40 cm: UB31400 42 cm: UB31420 44 cm: UB31440 46 cm: UB31460 Contents: 1 x BEAST Components Ultra Bar IR 31.8 handlebars Weight: carbon-black | 440 mm: 227 g UD carbon-black | 440 mm: 259 g UD carbon-black | 460 mm: 235 g Manufacturer: Black East GmbH Hermann-Mende-Straße 5-7 01099 Dresden Germany info@beast-components.de
