Wolfcraft Wolfcraft Torx Corner Connection Set 4642100

This extensive corner connector set from Wolfcraft contains everything you need to make invisible connections!

In just 3 simple steps you can make connections quickly, accurately and safely for your workpieces. You can drill accurate holes with the conductor and then merge the two pieces with screws for a precise and safe connection. As a last step you have to hide the screw with a screw hole cover to make the connection fully invisible. The conductor is suitable for corner connections, T connections, flat connections and miter connections.

The delivery contains: 1 conductor for accurate hole drills, 1 stepped drill of fast steel, 1 adjustable depth stop, 1 Allen key, 1 Torx screwdriver bit, 10 wooden screw hole coverings and 40 Torx wood screws in 4 different lengths.

• Color: Multicolor
• Material: plastic and metal
• Dimensions box: 26 x 21 x 6 cm (L x B x H)
• Set with conductor for invisible screw connections
• Preservation for all plank thicknesses from 12 mm
• With integrated ruler for direct measurement of the plank thickness
• Suitable for:
• Corner connections
• T-connections
• Flat -connections
• Miter connections
• Delivery contains:
• 1 x conductor for invisible screw connections
• 1 x fast steel stair drill Ø 9.5 x 180 mm
• 1 x adjustable depth stop, Ø 9.5 mm
• 1 x Allen key SW3
• 1 x Torx screwdriver bit T20, 150 mm long
• 10 x dried beech wood screw hole coverings
• 10 x Torx screw (4 x 25 mm)
• 10 x Torx screw (4 x 30 mm)
• 10 x Torx screw (4 x 40 mm)
• 10 x Torx screw (4 x 60 mm)

For your safety It is essential to follow the safety instructions of the manufacturer of your drive machine. These devices must comply with the VDE regulations. Devices that were built after 1995 must have a CE certificate. Always pair the power supply before you change attachments, before you change your workpieces, before you carry out maintenance and when the device is not in use. Test before you start working that the device and the tools work well. Never work with damaged or blunt tools. Before you start working, check that the device is mounted correctly (check the screw couplings). Clamp the workpiece firmly in place. Make sure that the device is strongly supported. When using the device and the tools, make sure you have the data with regard to min./max. speeds and the direction of rotation that follows the product, on the package or in the instructions. The tools may only be used for their intended purposes. Never remove the protective devices. Make sure that your clothing (especially sleeves) do not flutter loose and protect your hair. Protect your ears when you perform work that produces a high noise level. Wear safety glasses and mouth and nasal protection for tasks that produce dust, chips, vapors or sparks. Never reach the device while it is in operation. Make sure that all electrical equipment is protected against dust and humidity. Keep children away from your workshop and store your device and tools in a safe place. Never allow inexperienced people to work with your equipment and tools without instruction or supervision. Always plan your work carefully and make sure you remain concentrated. Keep your workplace clean and tidy. Only use WolfCraft® reservoir components. We retain the right to technical adjustments. GPSR