This saw table Master Cut 1500 from Wolfcraft is ideal for accurate stationary use of circular saws, figures and tops.
The saw table ensures high precision results thanks to the adjustable aluminum machine plate, and the convenience with which your tool can be mounted. The support frame with struts is designed for maximum stability, but is also mobile and space -saving thanks to the folding mechanism. This multifunctional product can also be used as a milling table in combination with the Wolfcraft milling attack 6901000 (not included), or a workstation. Please note, when a hand circle saw is mounted you need a Wolfcraft Splijtwig 6903000 (not included).
The delivery contains 1 corner stop, 1 parallel stop, 1 safety switch, 1 push stick, 1 switch clamp, 1 safety shield, 4 plastic clamps to secure the workpiece horizontally and 2 insert circles (15 and 25 mm) for upper milling.
- Material: metal and plastic
- Work height: 86.5 cm
- Minimum/maximum opening width of the clamps: 12-62 cm
- Dimensions of top: 78 x 50 cm (L x B)
- MDF plate: 49.5 x 50 x 2.3 cm (B x D x H)
- Machine plate: 28.5 x 50 cm (B x L)
- Worktop made from MDF and cast aluminum
- Dimensions (when mounted): 94 x 64 x 86.5 cm (L x B x H)
- Dimensions (when folded): 64 x 114.5 x 19.5 cm (B x D x H)
- Load capacity: 200 kg
- Multifunctional for various projects
- High precision thanks to adjustable aluminum machine plate and easy machine mounting
- Supporting frame with struts for maximum stability
- Mobile and space -saving thanks to the folding mechanism
- Robust beech wooden clamp
- Delivery contains:
- 1 x Corner stop
- 1 x parallel stop
- 1 x Safety switch
- 1 x push stick
- 1 x Switch clamp
- 1 x safety screen
- 4 x plastic clamp to attach the workpiece horizontally
- 2 x inserting circle (15 and 25 mm) for top mills
General safety information • Keep your workplace clean and well lit. Chaos and non -compulsory work areas can result in accidents. • Do not work with electrical tools in an environment with explosion hazard, where flammable liquids are stored and where gas or dust is present. Electric tools creates sparks that can ignite dust and fumes. • Keep children and other people from your working area while using electrical tools. If you become distracted, you can lose control of the tools. • The plug of the electrical tools must fit into the socket. The plug may not be adjusted. Do not use adapters in combination with grounded electrical tools. Inappropriate plugs and corresponding sockets reduce the risk of an electric shock. • Protect electric tools against rain and moisture. If water ends up in an electrical tool, the chance of an electric shock is greater. • If you work outside with electrical tools, use only extension cords that are suitable for outdoor use. The use of an extension cord for outdoor use lowers the risk of an electric shock. • If the use of electrical tools in a damp environment cannot be avoided, use an earth leakage circuit breaker. This reduces the risk of an electric shock. • Be careful during work and use the electric tools with care. Never use electric tools if you are under the influence of drugs or alcohol. One moment of inattention can result in serious injuries. • When processing raw materials and when changing tools, wear suitable personal protection equipment and protective clothing, such as hearing protection, safety glasses, a dust mask with dust -producing tasks and gloves. • Remove the set -up tools or moers keys before switching on the electrical tools. A tool or moers key that is still attached to a rotating part of the device can cause injuries. • Wear suitable clothing, do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from rotating parts. Loose -fitting clothing, jewelry and long hair can get stuck in rotating parts. • Always use the protective cap with the vacuum cleaner. • Do not use electrical tools with a broken switch. A tool that can no longer be switched on or off is dangerous and must be repaired. • Keep unused electrical tools away from children. Let people who are unknown with the tools and people who have not read the manual do not use the tools. Electric tools are dangerous when used by inexperienced people. • Check before you start working whether the device and the tools work correctly. Never work with damaged or bone tools. • Only have your electrical tools repaired by a qualified person. Ask for original possessing parts, so that the safety of the electrical tools remains ensured. • Pull the plug from the socket and/or remove the battery from the tool before adjusting the setting of your device and before you change parts. The unintended restarting of electrical tools can cause accidents. • Place the machine table correctly before installing the electric tools. The safe assembly of the table is essential to prevent it from collapsing. • Attach the electrical tool to the machine plate before you use it. If the electric tools moves on the machine plate, you can lose control over it. • Place the machine table on a sturdy, even and horizontal surface. If the machine table can shift or wiggle, the tools and The workpiece is not being manipulated safely and steadily. • Do not overload the machine table and do not use it as a ladder or step. Overlay or standing on the table can move the center of gravity up the table, so that it can fall over. • Process no materials other than wood or easily processable plastic. Exception: it is permitted to process easily processable metals (such as aluminum), but only with the jigsaw with a suitable saw blade. • Single splinters, chips and similar residue in the area near an active saw blade may not be removed by hand! • The machine that is used must meet DIN EN 60745-1. Equipment built after 1994 must wear a CE marking. • Do not cut by hand without guiding aid; Use the Parralel or Corner. • Saw blades may not be delayed by pushing it on from the side after the drive has been activated! • Only use the tools for their intended purpose. • Only use error -free saw blades; The edge may not be thicker and the width of the teeth should not be narrower than the thickness of the wedge. • Check regularly whether all screws are tightened! • Never use your workbench in an unsuitable way or for purposes other than the intended goal! • Remove all objects that are not necessary from the workbench. • Do not use the machine for sawing firewood. • Do not use the machine table for processing logs. • The electric tools may only be switched on and off by means of the safety switch. • Only use the included switch clamp to permanently put the device switch in the "ON" position. • Always use a push stick when processing small and narrow workpieces. • Hang the push stick on the included bracket (Fig. 8) when it is not in use. • Make sure that the two rotating brackets for attaching the table legs are correctly placed, with the safety bolts in the holes in the side part, and ensure that the serrated screws are tightened firmly (Fig. 15.3). • Before you start working, make sure that the manual circular saw, the wood cutter or the jigsaw is properly attached to the machine plate, that the machine plate is anchored in the slot on the machine table and that the hexagon key has been inserted for additional security (Fig. 17.3 ). • Do not use the machine outside in the rain. • stick to the maximum permitted workpiece dimensions (see technical data).
