Schütte Schütte Eenknops mixer with round spout Diziani chrome -colored

This chrome -colored Diziani mixer from Schütte is made of metal with a chrome finish.

Moreover, thanks to the flexible, metal design of the connecting hose, the 360 ​​° rotating spout, the metal side handle, the ceramic discs and the replaceable cartouche of 40 mm are suitable for most washbasins.

If you are looking for a sustainable mixer for washbasins and sinks, then this Schütte mixer is exactly what you are looking for.

• Color: Chrome
• Material: brass
• Dimensions: 23 x 4.5 x 24 cm (L x B x H)
• Ceramic
• Low -noise, replaceable 40 mm cartouche
• Flexible metal connecting snakes
• With round spout and 360 ° turning range
• Sideways

Safety information · Have the installation only carried out by experts. · Beware: water damage! Close the water supply before installation. · Make sure that all gaskets have the right size. · These faucets are not suitable for use at low pressure and for small electric boilers. · We recommend installing a filter in the device, or at least to use corner valves with filter, to prevent strange materials that can damage the cartouche. · This tap is only intended for household use! Only suitable for use in rooms with a temperature of more than 0 ° C. If there is a chance of frost, close the water supply and let the tap drain. · Be careful when you use the hot water. Danger of burns! · Incorrectly installed fittings can cause water damage! · Make sure that the connection hoses do not come into contact with corrosive or corroding products, such as washing -up liquids or household cleaning products, this can lead to water damage. · Despite careful production, the product can have sharp edges. Be careful! Your sink tap is supplied in a massive package to protect it against transport damage. The package consists of recyclable materials. Drain them in an environmentally conscious way. Do not throw the product at the end of its lifespan in the residual waste. Ask the municipal administration about the possibilities for environmentally friendly drainage. Technical data · flow pressure: recommended as 1.5 - 6 bar. With a connection pressure of more than 6 bar, we recommend installing a pressure regulator. · Water temperature: max. 80 ℃. Installation instructions · Tighten the connection hoses only by hand. Do not use a tong or moers key! · Loosen the nozzle after installing the tap. Let the management and tap go well for a while, to rinse away infections and residue. · Do not turn the pipes and do not put any tension on it! Check with the first use whether all connections are leak -tight! · After the first use, thoroughly check all connections to ensure that they are properly stuck. · We offer no guarantee in the event of incorrect installation and the resulting damage!