Presto fiber putty lith pro fiber putty 1800g

2-component with extra added glass fibers Mixture of various highly reactive, amine-pre-accelerated polyester resins with various mineral, environmentally friendly fillers. For filling holes (up to 12 mm Ø), rust penetration, perforations, and irregularities. Can be used on all substrates and on surfaces subject to flaking and expansion forces, can be used on metal, wood, concrete, GRP in the automotive sector and in mechanical engineering. The filler is easy to apply, gives a smooth surface, is easy to sand (even after a long time), adheres well, has high elasticity, is free of asbestos and silicones, and is resistant to weak acids, weak alkalis, blowing agents, solvents, water and de-icing salts. Note: Protect from excessive heat, frost and moisture. Technical data: Base: polyester resin with mineral fillers Color: green Odor: of styrene Form: soft, thixotropic Potlife / processing time at 20 °C: approx. 6 - 8 min. Drying time (20 °C / 50 % relative humidity): sandable after approx. 20 minutes Flash point: approx. 33 °C (spatula) - not applicable for hardener Density at 20 °C: filler 1.6 g/cm³ - hardener 1.15 g/cm³ Hardener addition: 2 - 3 % (optimal mixture 2.5 %) Temperature resistance of the cured material: 120 °C Shelf life/storage: 18 months with proper storage (=10 °C - 25 °C, relative humidity max. 60 %) in closed original packaging Package size 1.80 kg Main color green Area of application vehicle processing Type of packaging can Type of hardener Type/kind Article Design pretreatment