Motip removable coating transparent

This coating contains a removable paint that is also called plasti dip. The coating is comparable to the well-known car wrapping. The coating can be used on a part of your choice and then easily removed, without damaging the existing varnish or paint layer. The coating is easy to use and can therefore be used by everyone. Properties of MoTip SprayPlast aerosol cans Simple and fast processing, in various colors and designs Easy to remove Protects against oil, grease, salt, stone chips, scratches, dirt and rain Good adhesion to many different materials, such as metal, plastic (PP, PE, PVC) and glass Not suitable for application to pourable materials such as wood, concrete and stone. Apply in 4 to 5 layers at 5 minute intervals. Can be repainted with acrylic, NC, alkyd, water-based and 2-component lacquers. This does not affect the later removal of the MOTIP SprayPlast layer. MOTIP SprayPlast dries after 2 hours. The MoTip SprayPlast spray can is equipped with a 360 degree valve. Not durable. Resistant to car washes and short-term use of a high-pressure spray, max. 130 bar. Heat resistant up to a maximum of 100 degrees. Specifications of the MoTip SprayPlast PlastiDip paint. Binder: a rubber-like polymer. Odor: solvent. Gloss: 60° measuring angle according to DIN. 67530 glossy: 80-85 GE matt: 8 GE Coverage: Depending on the opacity of the color and the surface, 400 ml will be sufficient for 2 wheels; depending on the size and structure of the rim Temperature resistance: up to 100°C Shelf life / storage: 10 years, storage may be provided (= 10° -25°C, relative humidity of 60% max.) safety sheet can be requested via info@soer.nl safety sheet can be requested via info@soer.nl Motip sprayplast flexible spray film is perfect for treating rims, but also for painting various other, non-absorbent surfaces such as metal, all 2-component paints, hard plastics or glass. A range of application options, for various purposes: with a spray can, with a paint brush or with a spray gun.