Enduro bearings deep groove ball bearing 6801 12 mm x 21 mm x 5 mm

Product Description Carefully manufactured, highly precise: the 6801 bearings by Enduro Bearings You can choose between ABEC 3 steel bearings (Type 1) and MAX bearings (Type 2). ABEC 3 bearings from Enduro Bearings feature 10th-degree chrome steel balls that are twice as round as the industry standard, and manufactured to the highest standard. The treads are made of a 52100 carbon chrome steel alloy that is vacuum-generated and then hardened for extra strength and durability. A high-gloss polish ensures precision and low noise. MAX bearings are characterised by a 35 to 40 % higher load capacity than standard radial bearings. For 20 years Enduro Bearings has been manufacturing them specifically for use on mountain bike shocks. As its name indicates, MAX bearings are fitted with the maximum possible number of balls. The grooves in the races are deeper to accommodate the multiple lateral turning forces at the MTB rear pivot. Specifications:Dimensions (Inner x Outer x Width):12 mm x 21 mm x 5 mmDesignation:6801Models:Type 1: Design:deep groove ball bearingsTolerance:ABEC 3Recommended Use:hubs, bottom brackets, headsetsInner Race Material:steel (52100)Outer Race Material:steel (52100)Ball Material:steelSeals:LLBBasic static load rating:0.8 kN (188 lbs)Manufacturer Number:6801LLB Type 2: Design:deep groove ball bearingsTolerance:ABEC 3 / ABEC 1Recommended Use:Suspension pivots, shocksInner Race Material:steel (52100)Outer Race Material:steel (52100)Ball Material:steelSeals:LLUBasic static load rating:1.3 kN (286 lbs)Manufacturer Number:6801LLUMAXFeatures:Type 1: ABEC 3 bearings with riveted steel ball cage for more durabilitychrome steel balls 10th degree = circularity is 10/1,000,000"race grooves made of carbon-chrome steel alloy, heat and cold treated (down to -190° C), minimum hardness Rockwell HRC 62, polishedLLB: widely used seal type made of nitrile rubber with steel insert, in a groove in the inner race (labyrinth bearing), two super thin sealing lips; the outer one keeps out water and contaminants, the inner one retains greaseLevel 3 in the rating of the Annular Bearing Engineer's Committee (ABEC) in terms of manufacturing tolerances and noise development Type 2: MAX bearing (MAX = maximum number of balls, without cage or partitions) with 35 % higher load capacity than standard bearings and reduced ease of movementchrome steel balls 10th degree = circularity is 10/1,000,000"race grooves made of carbon-chrome steel alloy, heat and cold treated (down to -190° C), minimum hardness Rockwell HRC 62, polishedLLU: Seal type with double lip, in a groove in the inner race; particularly resistant to dirt and dust due to increased pressure, 90% grease filling rate (Almagard Extra High Pressure Grease)Level 1 rating from the Annular Bearing Engineer's Committee (ABEC) in terms of noise, manufacturing tolerances correspond to level 3Contents:1 x Enduro Bearings 6801 12 mm x 21 mm x 5 mm ball bearing Weight: universal | type 2: 5.8 g Manufacturer: Enduro Bearings 650 Lighthouse Ave. #120 Pacific Grove CA 93950 USA info@endurobearings.com Distributor: Cosmic Sports GmbH Leyher Straße 47 90763 Fürth Germany info@cosmicsports.de