Mirage Crank turners with stainless steel bolt aluminum T6 silver

The set contains 2 aluminum crank elderers (left and right)
Suitable for pedals with 9/16 thread (most common)

The Mirage Crank turners offer a solution such as:

- a children's bicycle on growth has been purchased
- there is a difference in leg length
- a smaller radius of the revolution is desirable for a training or a recovery process of the knee

The crank -turner makes a difference in length of 2.5 or 5 centimeters.

Assembly:

This set consists of blocks with left and right wire. Place the correct crank on the crank and screw it properly with the stainless steel bolt. There are 3 sizes of threaded ends. Choose the correct size and screw the thread ends well until the block can no longer move.
Place the pedals at the desired height in the crank traffic porter. If the thread of the pedal is longer than the thickness of the crowder, use must be made of the filling rings. The set contains:

The set contains:
- 2 aluminum crank turners left and right wire
- 2 stainless steel bolts left and right
- 4 rings
- 4 threaded ends: 4x 7mm / 4x 11mm / 4x 13mm

Suitable for:
- Pedals with 9/16 thread (most common)
- Crank arm width from 26 to 38 mm Mirage Crank turners (cranco) aluminum. Makes a difference of 2.5 or 5 centimeters in crank length. Suitable for pedals with 9/16 thread, width crank arm from 26 to 38 mm