Abi fiber optic cable - pc - om3

This fiber optic patch cable is intended for establishing short fiber optic connections between passive cabling ports and active network equipment within a structured cabling environment in accordance with ISO IEC 11801. The cable is designed as a duplex configuration with ST connectors on both sides and is suitable for multimode OM3 (50/125 µm) applications. The connection is an ST-ST fiber optic link for point-to-point connections or for connecting patch panels to active network ports. The LSZH jacket is halogen-free, low-smoke, and flame-retardant in accordance with IEC and EN standards. The cable is equipped with aramid strain relief for mechanical stability and long-term reliability. Specifications • Cable type fiber optic patch cable • Configuration duplex • Number of fibers 2 • Connection side A ST male • Connection side B ST male • Connector standard IEC 61754-2 • Connector finish UPC (no APC version) • Fiber type multimode 50/125 µm • Category OM3 in accordance with IEC 60793-2-10 type A1a.2 / A1a.3 • Cable construction duplex • Cable type I-V(ZN)H • Cable diameter 3.0 mm • Jacket material LSZH • Halogen-free in accordance with IEC 60754-1 and EN 50267-2-3 • Low smoke in accordance with IEC 61034-1 • Flame retardant in accordance with EN 50265-2-1 • Quality class multimode A/1 in accordance with IEC 61753-222-2 • Maximum tensile strength 160 N • Dynamic bend radius 20× OD • Static bend radius 10× OD • Operating temperature −20 to 70 °C • Storage temperature −20 to 85 °C • Maximum insertion loss 850 nm < 0.3 dB • Test 100% tested with individual measurement protocol IEC standards • IEC 60793-2-10 specification of multimode optical fiber • IEC 61754-2 definition of ST connector interface • IEC 61753-222-2 performance requirements for multimode connectors • IEC 60754-1 determination of halogen content • IEC 61034-1 determination of smoke emission Explanation of terms • ST round fiber optic connector with bayonet locking • Duplex two optical fibers for simultaneous bidirectional communication • Multimode 50/125 µm fiber type for high bandwidth within buildings and data centers • OM3 laser-optimized multimode category suitable for 10G transmission up to approximately 300 m at 850 nm • LSZH Low Smoke Zero Halogen jacket without halogen and with low smoke emission • Aramid strain relief reinforcement yarn for mechanical protection of the fiber • Insertion loss optical attenuation at the transition between fiber optic components Explanation of OM categories (multimode fiber optic) OM stands for Optical Multimode and describes the bandwidth class of multimode optical fiber. • OM1 62.5/125 µm – 1G up to approximately 275 m. • OM2 50/125 µm – 1G up to approximately 550 m, 10G up to approximately 82 m. • OM3 laser-optimized – 10G up to approximately 300 m at 850 nm. • OM4 improved laser-optimized fiber – 10G up to approximately 400–550 m at 850 nm. • OM5 wideband multimode suitable for SWDM technology. Explanation of OS categories (singlemode fiber optic) OS stands for Optical Singlemode and describes the attenuation class of singlemode optical fiber. • OS1 singlemode fiber for indoor installations with typical attenuation ≤ 1.0 dB/km at 1310 nm. • OS2 low water peak singlemode fiber in accordance with ITU-T G.652.D with typical attenuation ≤ 0.4 dB/km at 1310 nm and ≤ 0.3 dB/km at 1550 nm. General explanation of fiber optic cables • Fiber optic cables transmit data via light signals instead of electrical signals. • Singlemode fiber optic cable uses a single light path and is suitable for long distances. • Multimode fiber optic cable uses multiple light paths and is suitable for shorter distances within buildings. • Simplex single optical fiber for data transmission in one direction. • Duplex two optical fibers for simultaneous communication in both directions. Ask a product question