Abi cat 8.1 rj45 connector

RJ45 field-terminable connector Cat 8.1 Class I This RJ45 field-terminable connector is suitable for on-site termination of Cat 8.1 Class I installation cables. The connector is designed for tool-free assembly and supports high-quality data transmission within professional and industrial network installations. Housing & Shielding The connector features a fully shielded zinc die-cast housing. The construction provides 360° shielding contact and good EMC properties, suitable for environments with increased electromagnetic loads. Connection Technology The connector uses IDC (insulation displacement connector) contacts. The low contact resistance contributes to a stable electrical connection. The connector is suitable for cables with a diameter up to 9.0 mm. Cable and Conductor Specifications Suitable for solid and stranded conductors with a wire gauge from AWG 22 to AWG 27. Supports both solid conductors and litz wires. Wire assignment according to TIA 568A, TIA 568B, and industrial Profinet 1-2-3-6 color coding. Re-termination The connector can be re-terminated up to 5 times with a consistent cable diameter. When using AWG27/7 conductors, re-termination is possible up to 2 times. Technical Specifications • Connector type: RJ45 8P8C • Category: Cat 8.1 Class I • Shielding: fully shielded • Housing: zinc die-cast alloy • Connection type: IDC (insulation displacement connector) • Wire gauge: AWG 22 – 27 • Maximum cable diameter: 9.0 mm • Contact coating: gold-plated (50 µinch) • Contact resistance: < 20 mOhm • Insulation resistance: 500 MOhm • Dielectric test voltage: 1000 V DC • Current capacity: 1.5 A • Number of pairs: 4 • Number of mating cycles: ≥ 750 • Latch: snap lock • IP protection rating: IP20 • Operating temperature: -40 °C to 66 °C PoE Support • Suitable for IEEE 802.3af PoE • Suitable for IEEE 802.3at PoE+ • Suitable for IEEE 802.3bt 4PPoE Certifications & Standards • ISO/IEC 11801: International standard for structured data cabling, in which Cat 8.1 Class I is defined for RJ45 connectors • IEC 60603-7: International standard for RJ45 connector interfaces and electrical properties • ANSI/TIA-568: North American standard for pin assignment, color coding, and performance requirements of twisted-pair cabling • IEEE 802.3: Ethernet standard on which transmission speeds up to 40 Gbps and PoE specifications are based • UL94 V-0: Fire safety classification for plastic components, self-extinguishing upon ignition Other Features • Dust cap included • Anti-kink sleeve included • Suitable for round cables • Not suitable for flat cables • Tool not required for assembly Ask a product question