Kellermann power resistance low power resistance 7.5 il7.5

When converting the original indicators to LED indicators or halogen indicators, the flashing frequency changes automatically. This is remedied by the power resistors connected in parallel. For Micro 1000® / Rhombus DF / DF Dark and a flashing light, 1 additional resistor of 33 Ohm is required for the rear light and 1 additional resistor of 7.5 Ohm for the brake light. Resistors required when converting to Kellermann turn signals (per turn signal) 21 Watt Power consumption of the original turn signals: Micro 1000® Halogen - 10 Ohm, Micro 1000 / Micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 7.5 Ohm, BL 1000 Halogen (yellow, white, SG) - no power resistor, BL 1000 LED (LED, Dark, PL) - 7.5 Ohm. Resistors required when converting to Kellermann turn signals (per side) 10 watts power consumption of the original turn signals Micro 1000® Halogen - 10 ohm, Micro 1000® / Micro Rhombus (yellow, white, Dark, DF, PL, Extreme) - 10 ohm, BL 1000 Halogen (yellow, white, SG) - no power resistor, BL 1000 LED (LED, Dark, PL) - 10 ohm Type/type Accessories