Icetoolz cable guide with magnet internal, 67r3

IceToolz cable guide set with magnet This IceToolz internal routing tool is a set of cable guides for the racing bike or ATB. The cables are easily guided through the frame with these cable guides. This cable guide set is for the outer cable, Di2 cable and also has an extra cable guide that can pick up any cable from the frame. This cable guide fits through 6mm holes. The IceToolz article number of this cable guide is 67R3. IceToolz cable guide tool for internal routing for racing, but also for electric bicycles. Getting cables through a frame is a separate job, especially with a carbon frame. That is already the case for outdoor cables, but a Di2 cable or other power cable is completely difficult to guide through the frame. With this IceToolz cable guide set, guiding a cable through the frame is a piece of cake. This internal routing tool saves a lot of time and frustration. In the case of the outer cable, the cable guide is twisted into the outer cable at one end and then pushed through the frame with the other end. Once it is estimated that the cable guide is in the right place, the cable guide can be stuck on with the strong magnet from this cable guide set and immediately lifted out of the frame at the exit. In the case of a Di2 or other power cable, the end of the Di2 cable is inserted into the sleeve of the cable guide and the cable guide can then follow the same route through the frame as described above. The included adapter is specifically for Shiman EW-DS300-I thread. The third cable guide is a general rescue line. The magnet on the end can pick up a lost cable. This IceToolz internal routing tool is a set of cable guides for the racing bike or ATB. The cables are easily guided through the frame with these cable guides. This cable guide set is for the outer cable, Di2 cable and also has an extra cable guide that can pick up any cable from the frame. This cable guide fits through 6mm holes.