Griffon liquid rubber HBS-200 5l

Special features Water and airtight Very high, permanent elasticity (900%) Good adhesion to many surfaces Durable quality: minimum lifespan 20 years (tested in accordance with EN 1297) Protects against corrosion and erosion Easy to apply Weather and UV resistant Salt and chemical resistant Repaintable VOC-free Non-toxic Non-toxic Universal, durable, water and air sealing and protective coating Suitable for sealing and protecting many materials, such as concrete, metal, stone, wood, bitumen, zinc, PVC, EPDM (preliminary testing), etc. For floors, walls, seams, joints, penetrations and construction parts Very suitable for indoor and outdoor applications (bathrooms, cellars, balconies, roofs, etc.) such as gutters, shower drains, pipe penetrations, bilge seams, expansion joints, frame connections and ground level details Also suitable as a waterproof layer under tiling in damp environments such as bathrooms, swimming pools, balconies, terraces, etc. Technical data Remove wet residues immediately with water, GRIFFON Wipes or GRIFFON Hand Cleaner. Dried residues can only be removed mechanically. Consumption: ± 2.7 l per m², with a layer thickness of 2 mm. Store tightly closed container in a dry, cool, frost-free place at a temperature between +5°C and +25°C. Wear eye protection and wash hands thoroughly after use. Contents: 5000 ml Instructions for use Stir manually before use until a homogeneous color is obtained. Stirring with an electric mixer at high speed is not recommended. Apply in several layers. Preferably let the layer dry before applying the next layer. Drying time depends on the relative humidity, temperature and substrate. For seam, crack and crack bridging applications. Use GRIFFON HBS-200® GeoTextile. GRIFFON HBS-200® GeoTextile should be applied to still wet HBS-200® Liquid Rubber. Then immediately cover with a second layer of HBS-200® Liquid Rubber. Always ensure a layer thickness of at least 2 mm after curing. Can only be used at temperatures above +5°C. After approximately 60 minutes, a surface skin forms, which can withstand (light) rainfall after 4 hours. Completely waterproof after 24 hours. Surfaces must be dry, clean, free of dust and grease. The use of a (water-based) primer on porous, weathered and corroded surfaces can improve the adhesion of HBS-200® and limit blistering