Cool washbasin tap - mixer tap - with pull-out mousseur - chrome

Say goodbye to boring and outdated bathroom taps and say hello to this sleek and trendy COOL washbasin mixer tap with pull-out spray head from EISL.

• Modern design: the COOL tap is made of coated brass and has a bold chrome-look design that immediately takes the look of your bathroom to the next level.
• Practical bathroom tap: the bathroom tap has a cold and hot water connection (2 connecting hoses) and is suitable for flow heaters.
• Durable Ceramic Discs: The ceramic discs are highly resistant to wear and tear, ensuring long-lasting and reliable performance. This basin mixer is perfect for daily use with smooth and easy operation.
• Easy to install: with the included mounting set with all necessary accessories, installing this washbasin tap becomes child's play.

• Colour: chrome
• Material: coated brass
• Dimensions: 5 x 16 x 16 cm (W x D x H)
• Extendable hose length: approx. 150 cm
• Washbasin mixer tap and pull-out spray head
• Cold start function (cold water when the lever is in the middle position)
• Includes ceramic discs
• Low-noise, replaceable 35 mm cartridge
• Side metal lever
• Water spread: 110 mm
• Connection type: high pressure
• Easy to assemble
• Delivery includes:
• 2 x 350 mm flexible metal connection hose
• mounting fasteners

Safety information · Have installation carried out only by experts. · BEWARE: WATER DAMAGE! Turn off the water supply before installation. · Make sure all gaskets are the correct size. · These taps are not suitable for use at low pressure and for small electric boilers. · We recommend installing a filter in the device, or at least using corner valves with filters, to prevent foreign materials from entering that could damage the cartridge. · This tap is intended for domestic use only! Only suitable for use in rooms with a temperature above 0 °C. If there is a risk of frost, turn off the water supply and drain the tap. · Be careful when using the hot water: risk of burns! · Incorrectly installed connections can cause water damage! · Make sure that the connection hoses do not come into contact with caustic or corrosive products, such as dishwashing liquids or household cleaners, as this can lead to water damage. · Despite careful production, the product may have sharp edges. Be careful! Technical data · Flow pressure: recommended as 1.5 to 6 bar. With a connection pressure of more than 6 bar, we recommend the use of a pressure regulator. · Water temperature: max. 80 ℃. Installation instructions · Tighten the connection hoses only by hand. Do not use pliers or wrenches! · After installing the faucet, loosen the nozzle. Then let the pipe and tap run for a while to rinse away any contamination and residue. · Do not twist or apply tension to the pipes! When using for the first time, check whether all connections are leak-tight! · After first use, thoroughly check all connections to ensure they are secure. · We offer no warranty for incorrect installation and resulting damage! Care instructions Sanitary faucets require special care. Therefore, follow the following instructions: · Chrome-plated surfaces are sensitive to limescale removers, acidic cleaning agents and all types of abrasives. · Never clean colored surfaces with abrasive, corrosive or alcohol-containing agents. · Only clean your taps with clear water and a soft cloth or chamois cloth. Be careful not to get any cleaning solution into the cartridge housing as this can cause the lever to stiffen and make noise. Remember to unscrew the nozzle regularly to remove any limescale and foreign materials. In case of serious contamination it is recommended to replace the nozzle. Maintenance · A cartridge is a replaceable part and may need to be replaced every 1-2 years if the water contains a lot of limescale or dirt. You will find illustrated instructions for replacing the cartridge on our website, via this link: web.eisl.at/qrcode/Austausch_Kartusche-Ventiloberteil_Eisl.pdf · Check all connections regularly for leaks and visible damage. · In case of leaks or visible damage to the fitting or connection hoses, they must be checked immediately by a professional and replaced if necessary. Disassembly · Turn off the water supply before disassembling the product. · Pay attention to the outflow of residual water. · Disassemble the product according to the assembly instructions in reverse order. Disposal Your sink tap is delivered in solid packaging to protect it against transport damage. The packaging consists of recyclable materials. Dispose of them in an environmentally conscious manner. Do not throw the product into the residual waste at the end of its lifespan. Ask the municipal administration about the options for environmentally friendly disposal. 6. The illustrations are to be regarded as figurative demonstrations, the actual product may differ from the illustrations. Subject to technical adjustments. WARRANTY CARD Eisl Sanitait GmbH, located in Salzburg, assumes the manufacturer's warranty for the product you have purchased in accordance with the warranty conditions stated below. Your legal warranty based on the purchase contract with the seller and your statutory rights are not affected by this warranty. Warranty conditions: 1. Scope of the warranty. Eisl Sanitair GmbH guarantees correct material quality and material processing in accordance with the intended purpose and professional installation, tightness and function. The warranty is only applicable in the country in which the product was purchased. The warranty also includes a 1-year warranty on the durability of non-high-gloss chrome surfaces, such as bronzed or colored surfaces. The following are not covered by the warranty: · Corrosion in the nozzle (aerator). · Cartouche. · Damage due to incorrect installation, incorrect application and incorrect use. · Damage due to external influences, such as fire, water and chemical influences. · Mechanical damage caused by accidents, falls or other impact effects. · Negligence or intentional destruction. · Normal wear and tear or poor maintenance. · Damage due to repairs by an unauthorized person. · Improper handling, inadequate maintenance and use of inappropriate cleaning agents. · Chemical or mechanical influences during transport, storage, connection, repairs and use of the product. 2. Warranty service. The warranty service refers to, depending on our choice, free repairs or free delivery of additional parts or a product of the same quality upon return of the defective part or product. If the model in question is no longer produced, we reserve the right to choose a replacement product from our range that is most comparable to the returned model. Replaced products and parts become our property. When returning the product, the buyer bears the costs and risks of transport, if it is not a warranty situation in accordance with the legal warranty regulations. In the latter case, we will reimburse the transport costs. The reimbursement of costs for disassembly and assembly, inspection and claims in respect of lost profits and damages are excluded from the warranty, as are further claims in respect of damage and losses of any kind caused by the product or its use. 3. Submission of Warranty Claim. The warranty claim must be submitted together with the original proof of purchase within the warranty period to Eisl Sanitär GmbH, Himmelreich 1, 5020 Salzburg. 4. Warranty period. The warranty period is always the period stated on the label or packaging of each individual product. In the event that no specific warranty is stated for a specific product, the warranty period is always 2 years from the date of purchase, with the date on the proof of purchase being binding. Exception: The durability of high-gloss chrome surfaces, such as bronzed or colored surfaces; in this case the warranty period is 1 year and the date on the proof of purchase is also binding. The warranty period for the product is not extended or renewed through warranty services. Warranty services do not limit the warranty period unless there is a legal provision and legal requirement for a limitation. 5. German law applies to this warranty, excluding the United Nations Convention on Contracts for the International Sale of Goods (CISG). 6. Severability Clause. Should any of the provisions of the guidelines be or have been rendered ineffective in whole or in part, or if the parties inadvertently do not create a guideline with respect to a situation of this contract, the validity of the other provisions of this contract shall remain unaffected. Instead of the ineffective or inapplicable provision, or in place of the contractual gap, an effective or applicable provision is added that comes closest to the intention and purpose of the ineffective or inapplicable provision. In the event of a gap, the provision must be agreed to in accordance with what would have been agreed, in accordance with the intention and purpose of this contract, if the parties had considered this situation from the beginning. This also applies if the ineffectiveness of a provision is based on a measure of performance or time standardized in this contract. In such cases, the agreed level is replaced with a legally permitted level of performance or time that comes as close as possible to the agreed level. This warranty card is only valid in combination with the original proof of purchase."