Antenna amplifier

This SAT/BK inline amplifier is designed to boost coaxial signals in satellite and terrestrial antenna installations. The amplifier is placed inline in the coaxial cable and is used for long cable runs or installations with multiple connections where the signal may weaken. The amplifier supports a frequency range of 47 MHz to 2400 MHz and is suitable for both SAT signals and terrestrial antenna signals. This allows the device to be used in satellite installations, cable installations, and antenna networks for television. The amplifier is connected via F-connector connections. Power is supplied by the connected receiver via 15 V DC power through the coaxial cable, eliminating the need for a separate power adapter. With a gain of 20 dB, the device can increase the signal level over longer coaxial cables or in larger distribution systems in an antenna installation. The maximum noise figure of 4.5 dB ensures that the amplification is achieved with limited additional signal noise. Specifications • Product type SAT/BK inline • Application Signal amplification in coaxial installations • Frequency range 47 – 2400 MHz • Connector type F-connector female • Mounting Inline in coaxial cable • Power supply 15 V DC via coaxial cable (± 3 V) • Gain 20 dB • Noise figure max. 4.5 dB Inline amplifier An inline amplifier is placed directly in a coaxial cable to boost the signal along the way. This may be necessary for longer cable runs or when multiple connections are fed from a single signal source. SAT and terrestrial signals Due to its wide frequency range up to 2400 MHz, the amplifier can process both satellite signals and terrestrial antenna signals within coaxial distribution systems. Ask a product question