Abi WiFi antenna - 5 dbi

This dual-band WLAN antenna is designed for receiving and transmitting wireless network signals within devices such as routers, embedded systems, industrial controllers, and IoT equipment. The antenna supports WLAN 2.4 GHz and 5 GHz frequency bands and can be used for modern wireless networks such as WiFi 5 and WiFi 6. The antenna consists of a twin antenna setup with two separate PCB antennas. Each antenna is connected via an I-PEX Inc., MHF® 4L plug connector, making the antenna suitable for compact wireless modules and mini-PCIe / M.2 WiFi cards. The antenna operates within a frequency range of 2400 – 2500 MHz and 5150 – 5850 MHz. This allows the antenna to be used for WLAN dual-band networks and other wireless standards such as Bluetooth, ZigBee, and ISM band applications. With an antenna gain of 5 dBi, linear vertical polarization, and an omnidirectional radiation pattern, the antenna is suitable for stable signal reception within electronic devices. The antenna is designed as a flexible PCB antenna (FPC) with self-adhesive mounting. This allows the antenna to be easily placed inside an enclosure. The antenna comes with two type 1.13 coaxial cables, each approximately 15 cm long. The cable has a signal attenuation of about 3.2 dB per meter at 2.4 GHz. Specifications • Connector 2 x I-PEX Inc., MHF® 4L plug • Frequency range 2400 – 2500 MHz • Frequency range 5150 – 5850 MHz • Supported standards Bluetooth, WLAN 2.4 / 5.0 GHz, ZigBee 2.4 GHz, ISM • Antenna gain 5 dBi • VSWR 2.0 • Impedance 50 Ohm • Polarization linear, vertical • Mounting self-adhesive • Operating temperature −10 °C ~ 55 °C • Housing FPC • Color black • Cable coaxial • Cable type 1.13 • Cable color black • Cable diameter approx. 1.13 mm • Cable attenuation 3.2 dB @ 2.4 GHz per meter • Minimum bending radius 4.5 mm • Dimensions approx. 61.60 × 7.00 × 1.60 mm • Cable length incl. connector 2 × approx. 15 cm Explanation of terms used WLAN WLAN (Wireless Local Area Network) is a wireless network used for WiFi communication. WiFi 6 WiFi 6 (IEEE 802.11ax) is a modern WLAN standard with higher data rates, lower latency, and better network capacity. Dual band Dual band means that an antenna can operate on both the 2.4 GHz and 5 GHz frequency bands. dBi dBi is a unit indicating the gain of an antenna relative to an ideal isotropic antenna. VSWR VSWR (Voltage Standing Wave Ratio) indicates how well an antenna is matched to the transmission line. Polarization Polarization describes the direction of the electromagnetic field of a radio signal. I-PEX MHF® 4L I-PEX MHF® 4L is a compact coaxial RF connector often used for internal antennas in WiFi modules and embedded systems. FPC FPC (Flexible Printed Circuit) is a flexible circuit board often used for internal antennas in compact electronic devices. Coaxial cable A coaxial cable is a type of cable specifically designed for transporting high-frequency RF signals. ISM band ISM (Industrial, Scientific and Medical) bands are radio frequencies that can be freely used worldwide for wireless applications. Ask a product question