Abi in-line antenna amplifier

This mini coaxial inline amplifier is designed to amplify coaxial signals in antenna and satellite installations. The amplifier is placed inline in the coaxial cable and compensates for signal loss that can occur with longer cable runs. This allows the signal level to be increased when the distance between the antenna, satellite installation, or receiver is greater. The inline amplifier boosts the signal by 18 dB and is connected between the LNB and the satellite receiver. The necessary power is supplied via the coaxial cable by using the LNB voltage as a power source. The amplifier supports a frequency range of 5 MHz to 2300 MHz and is suitable for both analog and digital signal transmission, including DVB-S satellite signals. This allows the device to be used with television signals such as SD, HD, Full HD, Ultra HD, and 3D. The amplifier has an F-connector male input and an F-connector female output and is placed directly between two coaxial connections. Thanks to its compact design, the device is only slightly thicker than a coaxial cable and can be easily installed in existing setups. Thanks to the waterproof rubber seal, the amplifier can also be used in outdoor installations. Specifications • Product type Mini coaxial inline amplifier • Connector type F-connector • Connection 1 F-connector male • Connection 2 F-connector female • Frequency range 5 – 2300 MHz • Signal amplification 18 dB • Impedance 75 ohm • Supply voltage 5 – 18 V DC • Power consumption approx. 40 mA • Certifications CE, WEEE • Length 43 mm • Width 11 mm • Height 11 mm • Diameter 11 mm • Packaging unit 1 piece Inline amplifier An inline coaxial amplifier is placed directly in the coaxial cable to compensate for signal loss. This may be necessary with longer cables or when the signal is distributed among multiple components. Application This type of amplifier is used in satellite installations and antenna systems where a stable signal is required over longer coaxial cable runs. Ask a product question