Speaker

The HQ Power VDSSP6.5/8 Pro 165 millimeter subwoofer is a speaker suitable for installation, designed to deliver the low frequencies of an audio signal. This item is placed in an opening of the correct dimensions and can ideally serve as a subwoofer in a speaker enclosure. In most cases, a tweeter and a midrange speaker should also be used. This item is intended to replace an existing subwoofer or can be used for installation in a new speaker enclosure. For mounting, screws can be inserted into the holes at the corners to secure the unit. Technical specifications At the back of the HQ Power VDSSP6.5/8 Pro 165 millimeter subwoofer, the cable that provides an audio signal from an installation is connected. The mounting depth for the subwoofer must be at least 75 millimeters, and the diameter of the opening used for this is 100 millimeters. The speaker itself, including the rim, has a diameter of 165 millimeters. The mounting holes used to secure the unit are located in this rim. To protect this item, a speaker grille can be used to prevent damage. The subwoofer weighs 1146 grams. Other information The cone of the HQ Power VDSSP6.5/8 Pro 165 millimeter subwoofer is made of polypropylene material. This cone is attached to the outer edge with a rubber surround for optimal movement. The maximum power that can be delivered by this product is 250 watts, and the subwoofer has an impedance of 8 Ohm. The voice coil has a diameter of 1 inch, and the magnet weighs 567 grams. The resonance is between 50 Hertz and 7,000 Hertz. The frequency response is 70 Hertz, and the sensitivity of this speaker is 90 dB. The subwoofer is black and, after placement and mounting, should preferably be covered with a suitable speaker grille for protection. Ask a product question