4049759024963

This fiber optic patch cable is designed for creating a short connection between a passive fiber optic interface and an active network port within a structured cabling environment according to ISO IEC 11801. The cable is configured as a duplex connection with LC-duplex and ST connectors and is suitable for singlemode OS2 G652D applications. The connection is an LC-ST fiber optic connection and is suitable for use with standard fiber optic equipment such as switches, media converters, and patch panels. The LSZH jacket makes the cable suitable for installations where low smoke emission and halogen-free material are required. **Specifications** • Cable type: Fiber optic patch cable • Configuration: Duplex for simultaneous transmission and reception • Fiber type: Singlemode 9/125 µm • Category: OS2 G652D • Number of fibers: 2 • Connector side 1: LC-duplex • Connector side 2: ST • Connector standard: IEC 61754-20 and IEC 61754-2 • Connector finish: UPC • Connector material: Ceramic ferrule • Cable type: I-V(ZN)H • Cable diameter: 2.0 mm • Jacket material: LSZH • Jacket construction: Zip-twin • Jacket color: Yellow • Strain relief: Aramid yarn with crimped bend protection • Maximum tensile strength: 160 N • Bend radius dynamic: 20× OD • Bend radius static: 10× OD • Operating temperature: −20 to 70 °C • Storage temperature: −20 to 85 °C • Quality class: Singlemode B/2 • EMI immunity: Complete insensitivity to electrical and electromagnetic interference • Test status: 100% tested with individual measurement report **IEC Standards** • IEC 60793-2: Specification of optical fiber core and fiber structure • IEC 60793-2-50: Definition of singlemode fiber type G652D • IEC 61754-20: Definition of LC connector interface • IEC 61754-2: Definition of ST connector interface • IEC 61753-1: Performance class B/2 for singlemode connectors • IEC 60754-1: Halogen-free properties • IEC 61034-1: Low smoke emission **EN Standards** • EN 50265-2-1: Flame retardant behavior of cable jackets • EN 50267-2-3: Halogen-free jacket materials **Explanation of Terms** • **LC-ST**: Fiber optic connection with an LC connector on one side and an ST connector on the other side • **Duplex**: Two separate optical fibers where one fiber transmits and the other receives • **Singlemode 9/125 µm**: Fiber optic type with a very small core for long-distance transmission • **OS2 G652D**: Singlemode fiber optic with low attenuation, specified for transmission at 1310 nm and 1550 nm for backbone and long-distance connections • **LSZH**: Jacket material with low smoke emission and no halogen-containing substances • **Ceramic ferrule**: Precision holder that precisely centers the optical fiber for stable signal transmission • **EMI immunity**: Signal transmission via light without interference from electrical currents and magnetic fields • **Bend radius**: Minimum cable curvature to prevent micro-bends and additional attenuation • **Bend radius static**: Minimum bend after the cable has been installed and secured • **Bend radius dynamic**: Minimum bend during installation or movement of the cable • **B/2 quality class**: Quality class for singlemode connectors with strict tolerances • **I-V(ZN)H cable type**: European designation for halogen-free indoor fiber optic cable **General explanation of fiber optic cables** • **LC**: Compact fiber optic connector with snap lock for high port density • **SC**: Rectangular fiber optic connector with push-pull lock for patch panels • **ST**: Round fiber optic connector with bayonet lock for older installations • **E2000**: Fiber optic connector with protective cap for low reflection and additional safety • **MPO / MTP**: Multiple fiber optic connector for high fiber density in data centers • **Simplex**: Single fiber optic for data transmission in one direction • **Duplex**: Two optical fibers for simultaneous communication in both directions • **Multimode fiber**: Fiber optic type for short to medium distances within buildings • **Singlemode fiber**: Fiber optic type for long distances and backbone connections **Explanation of OS categories** • **OS1**: Singlemode fiber optic for indoor installations, with higher attenuation than OS2, suitable for up to approximately 10 km when transmitting at 1310 nm • **OS2**: Singlemode fiber optic with low attenuation, specified for transmission at 1310 nm and 1550 nm, suitable for 40 km and more depending on transmission power and optical modules used Ask a product question