Imp wifi antenna - 1 dbi

This WLAN antenna is designed for receiving and transmitting wireless network signals within electronic devices such as routers, embedded systems, industrial controllers, and IoT equipment. The antenna supports WLAN frequency bands of 2.4 GHz and 5 GHz and can be used for modern wireless networks such as WiFi according to IEEE 802.11 ac/a/h/b/g/n. The antenna is equipped with an I-PEX Inc., MHF® I plug connector and can be connected to internal WLAN modules, for example, mini-PCIe or M.2 WiFi cards. The antenna operates within a frequency range of 2400 – 2500 MHz and 5150 – 5850 MHz. This allows the antenna to be used for WLAN dual-band networks and other wireless standards such as Bluetooth, ZigBee, and ISM-band applications. With an antenna gain of 1.5 – 2.0 dBi, the antenna is suitable for internal applications in compact electronic devices. The antenna comes with a type 1.13 coaxial cable with a length of approximately 25 cm, including the connector. The cable has a signal attenuation of about 3.2 dB per meter at 2.4 GHz. Specifications • Connector 1 x I-PEX Inc., MHF® I plug • Frequency range 2400 – 2500 MHz • Frequency range 5150 – 5850 MHz • Supported standards Bluetooth, WLAN 2.4 / 5.0 GHz, ZigBee 2.4 GHz, ISM • Antenna gain 1.5 – 2.0 dBi • VSWR 2.5 • Impedance 50 Ohm • Operating temperature −10 °C ~ 55 °C • Color black • Cable coaxial • Cable type 1.13 • Cable color black • Cable diameter approx. 1.13 mm • Cable attenuation 3.2 dB @ 2.4 GHz per meter • Minimum bending radius 4.5 mm • Dimensions approx. 20.00 × 7.00 × 1.90 mm • Cable length incl. connector approx. 25 cm Explanation of terms used WLAN WLAN (Wireless Local Area Network) is a wireless network used for WiFi communication. IEEE 802.11 IEEE 802.11 is a family of standards for wireless networks, including 802.11a/b/g/n/ac. Dual band Dual band means that an antenna operates on both the 2.4 GHz and 5 GHz frequency bands. dBi dBi is a unit that indicates the gain of an antenna relative to an ideal isotropic antenna. VSWR VSWR (Voltage Standing Wave Ratio) indicates how well an antenna is matched to the transmission line. Impedance Impedance is the electrical resistance for RF signals in a transmission line. Many antenna systems operate with 50 Ohm. I-PEX MHF® I I-PEX MHF® I is a small coaxial RF connector often used for internal antennas in WLAN modules and embedded systems. Coaxial cable A coaxial cable is a type of cable specifically designed for transporting high-frequency RF signals. ISM band ISM (Industrial, Scientific and Medical) bands are radio frequencies that can be used worldwide without license for wireless applications. Ask a product question