Aux splitter cable

This DELOCK jack cable is used as a headset splitter to divide one combined 3.5 mm 4-pole jack connection into two separate headset connections. This allows two headsets to be connected to one device simultaneously. The cable features one 3.5 mm jack male connector (4-pole) and two 3.5 mm jack female connectors (4-pole). Both outputs support stereo audio and a microphone signal, enabling two users to listen and speak simultaneously. The splitter is suitable for applications such as telephony, video calls, and conference calls via devices with a combined headset port. Specifications Brand: DELOCK Cable type: jack splitter cable Audio type: analog audio connection Connector 1: 3.5 mm jack male (4-pole) Connector 2: 2 × 3.5 mm jack female (4-pole) Connector type: TRRS to 2 × TRRS Mono / stereo: stereo with microphone Length: 25 cm Certifications: CE, RoHS, REACH, WEEE Explanation 3.5 mm jack: a commonly used audio connector for headphones, AUX connections, and portable audio equipment. This connection is used on smartphones, tablets, laptops, and various audio devices. TRRS connector: a jack connector with four contacts (Tip, Ring, Ring, and Sleeve). This allows stereo audio and a microphone signal to be transmitted via one connection. Headset splitter: a cable adapter that divides one combined headset connection into two connections, allowing multiple headsets to be used simultaneously. CTIA standard: a headset standard for 4-pole jack connections where the pin order consists of left audio, right audio, ground, and microphone. This standard is used by many modern smartphones, tablets, and laptops. Applications • Connecting two headsets to one device • Use for phone calls and conference calls • Use for video calls and online meetings • Use with smartphones, tablets, and laptops with combined headset connection Types of jack connectors 6.3 mm jack: a larger jack connector primarily used with professional audio equipment, musical instruments, and studio installations. 3.5 mm jack: a smaller jack connector widely used in consumer electronics such as smartphones, laptops, tablets, and portable audio devices. 2.5 mm jack: a compact jack connector used in headsets, walkie-talkies, and specialized audio equipment. Explanation of jack configurations TS (Tip-Sleeve): a jack configuration with two contact points. The tip carries the audio signal, and the sleeve acts as ground. TRS (Tip-Ring-Sleeve): a jack configuration with three contact points. This allows two audio signals to be transmitted, for example, a left and right channel for stereo audio. TRRS (Tip-Ring-Ring-Sleeve): a jack configuration with four contact points. This type of connection allows stereo audio and a microphone signal to be transmitted via the same connector. Explanation of audio signals Balanced audio: a method for audio transmission using two signal wires and a ground. Unbalanced audio: a form of audio transmission using one signal wire and one ground wire. Stereo audio: an audio system using two separate channels: a left and a right channel. Mono audio: an audio system using only one audio channel. Explanation of certifications CE: indicates that the product complies with European directives for safety, health, and environmental protection. RoHS: European directive restricting the use of hazardous substances such as lead, mercury, and cadmium. REACH: European regulation for the registration and control of chemical substances in products. WEEE: directive for the collection and recycling of electrical and electronic equipment. Ask a product question