Rp-sma adapter cable

This Delock RP-SMA to MHF4 adapter cable is designed for routing an antenna signal into a device. The cable is used to connect an external RP-SMA antenna to an internal RF module with an MHF4 connector. The cable features an RP-SMA female bulkhead connector with a sealing ring and an MHF® 4 plug. Thanks to the splash-proof mounting of the RP-SMA connector, this cable is suitable for applications where the antenna connection is routed through an enclosure. The coaxial cable has an impedance of 50 ohms and is suitable for various high-frequency applications such as Wi-Fi, LTE, and other RF systems. Due to its very thin cable diameter and small bending radius, this adapter cable is ideal for compact and precise installation. Applications • Connecting external RP-SMA antennas to internal RF modules • Wi-Fi, LTE, and RF applications • Antenna input through enclosures • Embedded systems and industrial electronics Specifications & features • Cable construction: Coaxial • Cable type: 0.81 • Impedance: 50 Ohm • Connector 1: RP-SMA female bulkhead • Connector 2: MHF® 4 plug • Thread length: 9 mm • Cable diameter: approx. 0.81 mm • Minimum bending radius: 3.24 mm • Cable attenuation: 4.9 dB @ 2.4 GHz per meter • Color: Black Explanation of connectors RP-SMA (Reverse Polarity SMA) is a commonly used antenna connector for Wi-Fi and RF equipment. The difference from standard SMA lies in the reversed pin configuration, meaning RP-SMA and SMA are not interchangeable. MHF® 4 is a very compact RF connector used on internal wireless modules such as Wi-Fi, LTE, and GPS modules. This adapter cable makes it possible to connect an internal MHF4 connector to an external RP-SMA antenna. Ask a product question