Abi cat 7a+ s ftp network cable per roll

CAT 7A Installation Cable S/FTP (PiMF) This CAT 7A installation cable is designed for fixed network cabling and meets high requirements in terms of shielding, electrical performance, and fire safety. The cable is equipped with solid copper conductors, S/FTP (PiMF) shielding, and an LSZH jacket compliant with CPR Dca. Standards & Certifications • Cabling standards: ISO/IEC 11801, IEC 61156-5, EN 50173-1 • Cable specification: CAT 7A • Fire test: IEC 60332-3-24 • CPR classification: Dca • CE compliant Applications • 100Base-T4 • 100Base-TX • 100VG-AnyLAN • 1000Base-T • 1000Base-TX • 155 Mbps ATM • 622 Mbps ATM • 10 Gigabit Ethernet • Suitable for PoE and PoE+ according to IEEE 802.3af / 802.3at Construction • Cable structure: S/FTP (PiMF) • Number of pairs: 4 • Conductor: solid copper (CU) • Wire gauge: 22 AWG • Conductor diameter: approx. 0.615 mm • Core insulation: Skin-Foam-Skin PE • Meter marking: present Shielding • Individual shielding: aluminum foil (PiMF) • Overall shielding: aluminum braid (overall) • Number of shielding layers: 2 Outer Jacket • Jacket material: LSZH • Jacket thickness: approx. 0.50 mm • Cable outer diameter: approx. 7.8 mm • Cable type: round • Color: blue Mechanical Properties • Operating temperature: -20 °C to +75 °C • Maximum pulling force during installation: 110 N • Minimum bending radius (installation): 8 × outer diameter • Tensile strength of jacket: ≥ 9.0 MPa • Elongation of jacket: ≥ 100 % • Cold bend test (static): no cracking at -20 °C Electrical Properties • Maximum bandwidth: 1200 MHz • Impedance: 100 Ohm • Nominal velocity of propagation (NVP): approx. 76 % • Maximum delay skew: ≤ 25 ns/100 m • Maximum DC resistance of conductor: ≤ 9.5 Ω/100 m (@20 °C) • Resistance unbalance within pair: ≤ 2 % (@20 °C) • Minimum insulation resistance: ≥ 5000 MΩ·km • Maximum operating voltage (UL): 300 V • Dielectric strength: 2.5 kV DC (2 s) or 1.0 kV DC (1 min) Explanation of Marks & Certifications The marks and standards below indicate the technical, safety, and fire safety requirements that this cable meets. ISO/IEC 11801 International standard for structured network cabling. This standard defines performance requirements for categories such as CAT 7A, including bandwidth, impedance, and crosstalk. IEC 61156-5 Specification for symmetric data cables with high transmission requirements. This standard describes the electrical and mechanical properties of high-quality network installation cables. EN 50173-1 European standard for generic data cabling in buildings. Focuses on compatibility, performance, and interoperability within network infrastructures. IEC 60332-3-24 Fire test standard for bundled cables. Demonstrates that the cable is flame-retardant and limits fire propagation. CPR Dca (Construction Products Regulation) European Construction Products Regulation for cables in buildings. Dca indicates the fire class and stands for limited flame spread with controlled smoke development. LSZH Low Smoke Zero Halogen. The cable jacket contains no halogens and produces less smoke and no corrosive or toxic gases in case of fire. CE Indicates that the product complies with the relevant European directives concerning safety, health, and environment. PoE / PoE+ Suitable for power transmission over Ethernet according to IEEE 802.3af and IEEE 802.3at, where data and power are transmitted via the same cable. Ask a product question