Imp speaker

If you are assembling a loudspeaker and using an enclosure, you will need, among other things, a subwoofer. This is also the case if you want to install a system in, for example, a car. With the Visaton W 170 S subwoofer 170 millimeter 8 Ohm, you are acquiring a speaker for delivering low tones. This subwoofer can be easily and quickly mounted. By using the holes placed in the edge of the product, the woofer can be secured with screws. At the back, you then have the option to connect the speaker to a cable for delivering the audio signal. This loudspeaker can be protected after mounting with a speaker grille, which should be able to prevent any damage. Technical specifications This Visaton W 170 S subwoofer 170 millimeter 8 Ohm is equipped with a paper cone. The cone has a special coating and is attached to the outer edge with an elastic rubber surround. As a result, the loudspeaker can produce long excursions in combination with a special voice coil. It uses a powerful drive system, and the speaker has an extended rear pole plate. The impedance of this product is 4 Ohm, and the subwoofer is also available with a resistance of 8 Ohm. The frequency response is 8,000 Hertz, and the resonant frequency is 36 Hertz. The nominal RMS power that can be delivered is 50 watts, with a maximum of 80 watts. Additional information This speaker has a magnetic induction of 1.0 T. The Visaton W 170 S subwoofer 170 millimeter 8 Ohm can be placed in an opening with a diameter of 148 millimeters and a minimum depth of 74 millimeters. The front pole plate has a height of 4 millimeters, and the winding is 12.5 millimeters high. The voice coil has a diameter of 25 millimeters, and the excursion limit is approximately 10 millimeters. The diameter of the speaker itself is 170 millimeters, and including the rim, the diameter is 187 millimeters. The net weight is 1.1 kilograms. Ask a product question